DAC
VIMAK DS-2000 D/A Converter
MADE IN USA
Condition : Pre-Owned, Good
Price :
MADE IN USA
Condition : Pre-Owned, Good
Price :
DAC
ORPHEUS ONE
MADE IN SWITZERLAND
-----SOLD------
MADE IN SWITZERLAND
-----SOLD------
DAC
REGA
MADE IN UK
-----SOLD-----
MADE IN UK
-----SOLD-----
DAC
ENLIGHTENED AUDIO DESIGNS
DSP 9000 PRO SERIES III
MADE IN USA
It's Top of The Line EAD DAC, Professional Digital Processor
24 Karat Gold-Plated Faceplates
Teflon Circuit Boards
Burr-Brown DAC's
0.1% Vishay Metal Film Resistors
Hybrid Digital Volume Array
Cardas Internal Wiring
ST-Glass Inputs
XLR Balanced Outputs
----SOLD-----
DSP 9000 PRO SERIES III
MADE IN USA
It's Top of The Line EAD DAC, Professional Digital Processor
24 Karat Gold-Plated Faceplates
Teflon Circuit Boards
Burr-Brown DAC's
0.1% Vishay Metal Film Resistors
Hybrid Digital Volume Array
Cardas Internal Wiring
ST-Glass Inputs
XLR Balanced Outputs
----SOLD-----
DAC (Tube)
ARCICI
MADE IN USA
Hand made DAC Tube made by Melos Audio USA
---SOLD---
MADE IN USA
Hand made DAC Tube made by Melos Audio USA
---SOLD---
DAC
MUSICAL FIDELITY M1 DAC
Dimensions (hwd, cm) 10x22x30
RCA out 1
XLR out 1
Optical digital out 1
XLR in 1
Coaxial digital in 1
Optical digital in 1
----SOLD---
Dimensions (hwd, cm) 10x22x30
RCA out 1
XLR out 1
Optical digital out 1
XLR in 1
Coaxial digital in 1
Optical digital in 1
----SOLD---
DAC
BRYSTON BDA-1
MADE IN CANADA
The Bryston BDA-1 is a state-of-the-art external Stereo DAC (digital to analog converter) using fully discrete Class-A proprietary Bryston analog circuits, two independent linear power supplies and dual Crystal CS-4398 DAC chips. The BDA-1 features an impressive array of inputs for USB, COAX, OPTICAL, AES-EBU and BNC equipped digital devices. For audio outputs, the BDA-1 offers both balanced XLR as well as unbalanced RCA stereo connectors on the rear panel. The BDA-1 is RS-232 software upgradeable, making it the most flexible high performance DAC on the market.
Feature Set
• Dual 192K/24Bit Crystal DAC’s
• Independent dual power supplies
• Discrete Class A analog output stage
• Oversampling
• Synchronous upsampling (176.4K/192K)
• Selectable upsampling feature
• Independent analog and digital signal paths
• Inputs: USB (1), COAX (2), OPTICAL (2), AES-EBU (1) BNC (2)
• 32, 44.1, 48, 88.2, 96, 176, 192K sampling
• 16-24Bit PCM, 16Bit 32K-48K USB
• Fully differential balanced XLR and unbalanced RCA stereo outputs
• Transformer-coupled SPDIF and AES EBU digital inputs
• SPDIF COAX bypass loop output
• RS-232 software upgrade
• Optional remote control
• Remote 12-volt trigger
• Compatible with CD drives, sound cards, computers, music servers
----SOLD---
MADE IN CANADA
The Bryston BDA-1 is a state-of-the-art external Stereo DAC (digital to analog converter) using fully discrete Class-A proprietary Bryston analog circuits, two independent linear power supplies and dual Crystal CS-4398 DAC chips. The BDA-1 features an impressive array of inputs for USB, COAX, OPTICAL, AES-EBU and BNC equipped digital devices. For audio outputs, the BDA-1 offers both balanced XLR as well as unbalanced RCA stereo connectors on the rear panel. The BDA-1 is RS-232 software upgradeable, making it the most flexible high performance DAC on the market.
Feature Set
• Dual 192K/24Bit Crystal DAC’s
• Independent dual power supplies
• Discrete Class A analog output stage
• Oversampling
• Synchronous upsampling (176.4K/192K)
• Selectable upsampling feature
• Independent analog and digital signal paths
• Inputs: USB (1), COAX (2), OPTICAL (2), AES-EBU (1) BNC (2)
• 32, 44.1, 48, 88.2, 96, 176, 192K sampling
• 16-24Bit PCM, 16Bit 32K-48K USB
• Fully differential balanced XLR and unbalanced RCA stereo outputs
• Transformer-coupled SPDIF and AES EBU digital inputs
• SPDIF COAX bypass loop output
• RS-232 software upgrade
• Optional remote control
• Remote 12-volt trigger
• Compatible with CD drives, sound cards, computers, music servers
----SOLD---
DAC
ALTIS REFERENCE
MADE IN USA
----SOLD----
MADE IN USA
----SOLD----
DAC (Tube)
SONIC FRONTIERS SFD2
MADE IN CANADA
Specifications :
Input receiver : 1x UltraAnalog AES20 AES/EBU
Digital filter : 1x NPC SM5803 with 8fs
D/A converters : 2x dual UltraAnalog D20400A
Low pass analog filter : proprietary passive configuration
Frequency response : 50Hz...20Khz (+ 0,5dB) 20Khz (- 0,1dB)
Intrinsic jitter : < 40 picoseconds
Jitter rejection : from 1Khz and above
S/N ratio : > 110dB (IHF-A)
Crosstalk : > 105dB (1Khz) > 85dB (10Khz)
THD : < 0,05%
Output voltage : 3.5V (single-ended) 7.0V (balanced)
Output stage : fully balanced for AC and DC parameters high speed tube buffer
Digital inputs : 1x coaxial (RCA) 1x optical (AT&T ST glass) 1x AES/EBU (XLR)
Digital output : 1x coaxial (RCA)
Tubes : 2x 6922 (E88CC)
PC : 75VA max.
Dimensions : 48 x 10 x 33cm
Weight : 12kg.
----SOLD---
MADE IN CANADA
Specifications :
Input receiver : 1x UltraAnalog AES20 AES/EBU
Digital filter : 1x NPC SM5803 with 8fs
D/A converters : 2x dual UltraAnalog D20400A
Low pass analog filter : proprietary passive configuration
Frequency response : 50Hz...20Khz (+ 0,5dB) 20Khz (- 0,1dB)
Intrinsic jitter : < 40 picoseconds
Jitter rejection : from 1Khz and above
S/N ratio : > 110dB (IHF-A)
Crosstalk : > 105dB (1Khz) > 85dB (10Khz)
THD : < 0,05%
Output voltage : 3.5V (single-ended) 7.0V (balanced)
Output stage : fully balanced for AC and DC parameters high speed tube buffer
Digital inputs : 1x coaxial (RCA) 1x optical (AT&T ST glass) 1x AES/EBU (XLR)
Digital output : 1x coaxial (RCA)
Tubes : 2x 6922 (E88CC)
PC : 75VA max.
Dimensions : 48 x 10 x 33cm
Weight : 12kg.
----SOLD---
DAC
ESOTERIC D2
MADE IN JAPAN
----SOLD---
MADE IN JAPAN
----SOLD---
DAC
ARAGON D2A2
MADE IN USA
The D2A2 is a complete re-think of the previous D2A and D2A Mark II. It used an internal power supply, the previous external supplies cannot be used. The D2A2 used the HDCD 8X oversampling filter which was suitable for large-size laser discs, CDs and HDCDs. The DAC chips used are Burr-Brown 20-bit monolithic units in dual configuration. As with the earlier units, the D2A2 would run at 32, 44.1 and 48 kHz sample rates, with switching of sample rates being automatic.
----SOLD---
MADE IN USA
The D2A2 is a complete re-think of the previous D2A and D2A Mark II. It used an internal power supply, the previous external supplies cannot be used. The D2A2 used the HDCD 8X oversampling filter which was suitable for large-size laser discs, CDs and HDCDs. The DAC chips used are Burr-Brown 20-bit monolithic units in dual configuration. As with the earlier units, the D2A2 would run at 32, 44.1 and 48 kHz sample rates, with switching of sample rates being automatic.
----SOLD---
DAC
MARK LEVINSON NO.36
MADE IN USA
---SOLD---
MADE IN USA
---SOLD---
DAC
MARK LEVINSON NO.36S
MADE IN USA
----SOLD---
MADE IN USA
----SOLD---
DAC
STYLOS SYS
HAD DAC
MADE IN SLOVENIA
Specifications
Digital input:
Single BNC (75 Ohm) and RCA connector (S/PDIF, AES3id standard digital audio interface)
1.2V p-p 1.6mA max. input; 10m (S/PDIF), 1000m (AES3id) max. distance of coax. cable
Up to 48kHz accepted sampling frequeny, up to 16bit accepted wordlength
Analog output:
Disktere MOS-SET class A, no feedback, servoless, DC coupled, short circuit proofed
symmetrical output stage
XLR balanced output ( 5V RMS at 0 dB )
RCA SE output ( 2,5V RMS at 0 dB )
Virtually 0 Ohm output impendance
Linearity +/- 0.5 dB ( 20Hz - 20kHz )
Power supply:
Internal no switching power supply
110/120 (on request) or 220/230V AC (on request) 50/60Hz input voltage
Semi regulated MOS FET power supply circuit for analog stage
Full regulated power supply for DAC alghrithm
3 separate high quality UI transformers
Mesurments and other specification
Total harmonic distortion plus nois:
Smaller than 0.1% ( Fs=44.1kHz at 0dB )
Dynamic range:
117dB ( EIAJ, A-weighted, Fs=44.1kHz )
Signal-to-noise ration:
117dB ( EIAJ, A-weightet, Fs=44.1kHz )
Channel separation:
115dB ( Fs=44.1kHz )
24bit/192kHz Texsas Instruments DAC
8x oversampling digital filter
Low-jitter clock recovery
384 Fs system clock frequency
Jitter attenution down to subsonic frequencies
No processor or mute electronic is used in conversion algorithm
----SOLD---
HAD DAC
MADE IN SLOVENIA
Specifications
Digital input:
Single BNC (75 Ohm) and RCA connector (S/PDIF, AES3id standard digital audio interface)
1.2V p-p 1.6mA max. input; 10m (S/PDIF), 1000m (AES3id) max. distance of coax. cable
Up to 48kHz accepted sampling frequeny, up to 16bit accepted wordlength
Analog output:
Disktere MOS-SET class A, no feedback, servoless, DC coupled, short circuit proofed
symmetrical output stage
XLR balanced output ( 5V RMS at 0 dB )
RCA SE output ( 2,5V RMS at 0 dB )
Virtually 0 Ohm output impendance
Linearity +/- 0.5 dB ( 20Hz - 20kHz )
Power supply:
Internal no switching power supply
110/120 (on request) or 220/230V AC (on request) 50/60Hz input voltage
Semi regulated MOS FET power supply circuit for analog stage
Full regulated power supply for DAC alghrithm
3 separate high quality UI transformers
Mesurments and other specification
Total harmonic distortion plus nois:
Smaller than 0.1% ( Fs=44.1kHz at 0dB )
Dynamic range:
117dB ( EIAJ, A-weighted, Fs=44.1kHz )
Signal-to-noise ration:
117dB ( EIAJ, A-weightet, Fs=44.1kHz )
Channel separation:
115dB ( Fs=44.1kHz )
24bit/192kHz Texsas Instruments DAC
8x oversampling digital filter
Low-jitter clock recovery
384 Fs system clock frequency
Jitter attenution down to subsonic frequencies
No processor or mute electronic is used in conversion algorithm
----SOLD---
DAC
CAMBRIDGE AUDIO
DACMAGIC
---SOLD---
DACMAGIC
---SOLD---
DAC
BEL CANTO
AIDA DESIGN
MADE IN USA
---SOLD---
AIDA DESIGN
MADE IN USA
---SOLD---
DAC (Tube)
SONIC FRONTIERS
SFD2 MKII
MADE IN CANADA
---SOLD---
SFD2 MKII
MADE IN CANADA
---SOLD---
DAC (Tube)
CALIFORNIA AUDIO LABS
SIGMA II
MADE IN USA
---SOLD---
SIGMA II
MADE IN USA
---SOLD---
DAC (Tube)
SYNTHESIS MATRIX
MADE IN ITALY
-Converter section:
-D/A converter: Walfon WM8740
-D/A conversion: 24bit
-D/A configuration: Dual mono 2 x WM8740
-Up sampling conversion: 192KHz
-Output section:
-Tube OpAmp: K2-W Philbrick model
2 X 12AX7WA
-Frequency response: 20Hz to 20KHz +- 0.5dB
-Inputs: 2 optical, 1USB, 2 coax
-Frequency response: 20Hz to 20KHz +- 0.5dB
-Signal/Noise ratio: >100dB, A weighted
-Power supply section:
-Tranformers: Low profile High grade
power transformers
-Filament power supply: DC filament voltage regulated
-Anodic power supply: Mosfet voltage regulated
-Line Power: 100, 120, 230, 250 Vac 50/60 Hz
-Power consumption: 50W Max
-Controls: Front: Graphic display,
-stby and source button
-Rear: male power sck,
-power switch, DGT and coax Input, USB input.
-Finish: Synthesis red lacquer or piano black lacquer
-Dimensions: (w,d,h) 320x220x60mm
-Weight: 6.0 Kg
----SOLD---
MADE IN ITALY
-Converter section:
-D/A converter: Walfon WM8740
-D/A conversion: 24bit
-D/A configuration: Dual mono 2 x WM8740
-Up sampling conversion: 192KHz
-Output section:
-Tube OpAmp: K2-W Philbrick model
2 X 12AX7WA
-Frequency response: 20Hz to 20KHz +- 0.5dB
-Inputs: 2 optical, 1USB, 2 coax
-Frequency response: 20Hz to 20KHz +- 0.5dB
-Signal/Noise ratio: >100dB, A weighted
-Power supply section:
-Tranformers: Low profile High grade
power transformers
-Filament power supply: DC filament voltage regulated
-Anodic power supply: Mosfet voltage regulated
-Line Power: 100, 120, 230, 250 Vac 50/60 Hz
-Power consumption: 50W Max
-Controls: Front: Graphic display,
-stby and source button
-Rear: male power sck,
-power switch, DGT and coax Input, USB input.
-Finish: Synthesis red lacquer or piano black lacquer
-Dimensions: (w,d,h) 320x220x60mm
-Weight: 6.0 Kg
----SOLD---
DAC (Tube)
AUDIO NOTE DAC2
MADE IN UK
---SOLD----
MADE IN UK
---SOLD----
