Floorstand Speaker
DYNAUDIO EXCITE X32
MADE IN DENMARK
Specifications :
Sensitivity 87 dB (2,83 V/1 m)
IEC Power handling 200 W
Impedance 4 Ohms
Frequency Response 37 Hz–23 kHz (± 3 dB)
Box Principle 2-way bass-reflex
Crossover Frequency 1800 Hz
Weight 17.2 kg each
Dimensions (W x H x D) 170 x 920 x 270 mm
6.7 x 36.2 x 10.6"
-----SOLD------
MADE IN DENMARK
Specifications :
Sensitivity 87 dB (2,83 V/1 m)
IEC Power handling 200 W
Impedance 4 Ohms
Frequency Response 37 Hz–23 kHz (± 3 dB)
Box Principle 2-way bass-reflex
Crossover Frequency 1800 Hz
Weight 17.2 kg each
Dimensions (W x H x D) 170 x 920 x 270 mm
6.7 x 36.2 x 10.6"
-----SOLD------
Bookshelf Speaker
OPERA MEZZA
MADE IN ITALY
System: stand or shelf, reflex with back firing duct
Drive units: 1x5” woofer (Seas) double treated cone, 1x1” dome Tweeter (Scanspeak), ferrofluid, decompression chambre
Design: 2-way
Frequency Response: 45-25000 Hz
Cross-over:
woofer low pass: 12 dB/oct, tweeter high pas: 12 dB/oct, cross-over freq: 1850 Hz
Power: 70 watt RMS
Amplifier: starting from 10 Watt RMS or more – far from clipping condition
Sensitivity: 88 dB/1watt/1 meter
Nominal Impedance: 4 ohm (Z min > 4 ohm)
In room position: far from room angles
Dimensioni: 20 x 32 x 32.5
Weight: 16Kg
Condition : Pre-Owned, Mint (Like new)
Price : Rp 14.500.000,-
MADE IN ITALY
System: stand or shelf, reflex with back firing duct
Drive units: 1x5” woofer (Seas) double treated cone, 1x1” dome Tweeter (Scanspeak), ferrofluid, decompression chambre
Design: 2-way
Frequency Response: 45-25000 Hz
Cross-over:
woofer low pass: 12 dB/oct, tweeter high pas: 12 dB/oct, cross-over freq: 1850 Hz
Power: 70 watt RMS
Amplifier: starting from 10 Watt RMS or more – far from clipping condition
Sensitivity: 88 dB/1watt/1 meter
Nominal Impedance: 4 ohm (Z min > 4 ohm)
In room position: far from room angles
Dimensioni: 20 x 32 x 32.5
Weight: 16Kg
Condition : Pre-Owned, Mint (Like new)
Price : Rp 14.500.000,-
Floorstand Speaker
LIVING VOICE
AUDITORIUM AVATAR 2
MADE IN UK
Specifications :
- Efficiency: 94db
- Nominal Impedance: 6 ohms
- Power Handling (per channel): 100w
- Frequency Responce: 35 Hz - 22.5 kHz
- 970 mm (h) x 280 mm (d) x 220 mm (w).
- reflex port
- Book matched premium veneers
- Hand wound air core inductors
- Mechanically isolated crossover
Condition : Pre-Owned, Mint
Price : Rp 26.000.000,-
AUDITORIUM AVATAR 2
MADE IN UK
Specifications :
- Efficiency: 94db
- Nominal Impedance: 6 ohms
- Power Handling (per channel): 100w
- Frequency Responce: 35 Hz - 22.5 kHz
- 970 mm (h) x 280 mm (d) x 220 mm (w).
- reflex port
- Book matched premium veneers
- Hand wound air core inductors
- Mechanically isolated crossover
Condition : Pre-Owned, Mint
Price : Rp 26.000.000,-
Standmount Speaker
HARBETH SHL-5
MADE IN UK
Condition : Pre-owned, Mint (Like new)
Price : Rp 40.000.000,-
MADE IN UK
Condition : Pre-owned, Mint (Like new)
Price : Rp 40.000.000,-
Bookshelf Speaker
REVEL PERFORMA M20
Description: Two-way, stand-mounted, reflex-loaded loudspeaker. Drive-units: 1" (25.4mm) aluminum-alloy dome tweeter, 6.5" (165mm) magnesium-alloy inverted-dome woofer; both units magnetically shielded. Crossover frequency: 2.2kHz, "high-order" filter slopes. Frequency response: 46Hz-16kHz, ±1dB (in-room). LF extension: -3dB at 44Hz, -6dB at 38Hz, -10dB at 33Hz. Nominal impedance: 6 ohms (4.4 ohms minimum). Sensitivity: 87dB/2.83V/m (4pi anechoic).
Dimensions: 15.5" (394mm) H by 10" (254mm) W by 12.25" (311mm) D, without grille or feet. Weight: 45 lbs (20.4kg) each.
Condition : Pre-Owned, Mint
Price : Rp 11.000.000
Description: Two-way, stand-mounted, reflex-loaded loudspeaker. Drive-units: 1" (25.4mm) aluminum-alloy dome tweeter, 6.5" (165mm) magnesium-alloy inverted-dome woofer; both units magnetically shielded. Crossover frequency: 2.2kHz, "high-order" filter slopes. Frequency response: 46Hz-16kHz, ±1dB (in-room). LF extension: -3dB at 44Hz, -6dB at 38Hz, -10dB at 33Hz. Nominal impedance: 6 ohms (4.4 ohms minimum). Sensitivity: 87dB/2.83V/m (4pi anechoic).
Dimensions: 15.5" (394mm) H by 10" (254mm) W by 12.25" (311mm) D, without grille or feet. Weight: 45 lbs (20.4kg) each.
Condition : Pre-Owned, Mint
Price : Rp 11.000.000
SPENDOR S3e
MADE IN UK
Description: Two-way, stand-mounted, sealed-box loudspeaker for use with stands 24-31" high (not included). Drive-units: 0.75" coated fabric-dome tweeter, 5" homopolymer cone woofer. Crossover frequency: 3.5kHz. Frequency response: 90Hz-20kHz, ±3dB. Impedance: 8 ohms nominal, 6 ohms minimum. Sensitivity: 84dB/W/m.
Dimensions: 12" H by 6.5" W by 7" D. Weight: 10 lbs.
Condition : Pre-Owned, Mint
Price : Rp 9.000.000,-
MADE IN UK
Description: Two-way, stand-mounted, sealed-box loudspeaker for use with stands 24-31" high (not included). Drive-units: 0.75" coated fabric-dome tweeter, 5" homopolymer cone woofer. Crossover frequency: 3.5kHz. Frequency response: 90Hz-20kHz, ±3dB. Impedance: 8 ohms nominal, 6 ohms minimum. Sensitivity: 84dB/W/m.
Dimensions: 12" H by 6.5" W by 7" D. Weight: 10 lbs.
Condition : Pre-Owned, Mint
Price : Rp 9.000.000,-
XAVIAN XN 125
MADE IN CZECH REPUBLIC
Technical information :
Mid-bass frequency unit 150 mm special custom Scan-Speak, made to Xavian specifications - impregnated paper membrane - soft dust cap - shortcircuiting ring in the "motor"
High frequency unit selected Scan-Speak Ring Radiator - 26 mm voice coil, copper shortcircuiting ring
System type 2 ways damped bass-reflex, massive rear aluminium port
Cabinet 22 mm MDF hand-crafted, bituminous damping
Frequency response (-3 dB on reference axis): 49 - 30000 Hz
Connection 1 pair of singly mounted XAVIAN binding posts
Nominal impedance 4 ohms
Crossover frequency 2600 Hz
Sensitivity ( 2V / 1m) 86 dB
Power amplification 30 - 120 W
Dimensions (HxWxD) 285 x 180 x 275 mm
Net weight (1 unit) 8 kg
Condition : Pre-Owned,Mint
Price :Rp 15.000.000,-
MADE IN CZECH REPUBLIC
Technical information :
Mid-bass frequency unit 150 mm special custom Scan-Speak, made to Xavian specifications - impregnated paper membrane - soft dust cap - shortcircuiting ring in the "motor"
High frequency unit selected Scan-Speak Ring Radiator - 26 mm voice coil, copper shortcircuiting ring
System type 2 ways damped bass-reflex, massive rear aluminium port
Cabinet 22 mm MDF hand-crafted, bituminous damping
Frequency response (-3 dB on reference axis): 49 - 30000 Hz
Connection 1 pair of singly mounted XAVIAN binding posts
Nominal impedance 4 ohms
Crossover frequency 2600 Hz
Sensitivity ( 2V / 1m) 86 dB
Power amplification 30 - 120 W
Dimensions (HxWxD) 285 x 180 x 275 mm
Net weight (1 unit) 8 kg
Condition : Pre-Owned,Mint
Price :Rp 15.000.000,-
ATC SCM10
MADE IN UK
Condition : Pre-Owned,Mint
Price :Rp 15.000.000,-
MADE IN UK
Condition : Pre-Owned,Mint
Price :Rp 15.000.000,-
Floorstand Speaker
BOHLENDER & GRAEBENER Z-7
MADE IN USA
Specifications :
Condition : Brand new
Price : Rp 10.000.000,-
MADE IN USA
Specifications :
- 4 Ohm, 89 dB/w/m
- 150 watt program power handling
- (2) 5.25" aluminum woofers
- (1) 3" NEO PDR tweeter
- Electronically matched crossovers with polypropylene capacitors
- Real wood veneer, Cherry or Black Ash enclosures
- Size 40"H x 8.75"W x 10.25"D
- Weight 42 lbs
Condition : Brand new
Price : Rp 10.000.000,-
Floorstand Speaker
XAVIAN GIULETTA
MADE IN CZECH REPUBLIC
Technical Specifications:
Mid-bass frequency unit: 148 mm Scan-Speak Revelator, paper membrane, SD-1 "motor".
High frequency unit: 29 mm Scan-Speak impregnated fabric soft dome, low - distortion "motor" no ferrofluid.
System type: 2-ways damped bass-reflex, massive aluminium bass-reflex port.
Cabinet: 22 mm MDF handly crafted.
Frequency response: ( -3 dB on reference axis ): 47 - 32000 Hz
Connection: 1 pair of singly mounted WBT Platinum
Signature binding posts.
Nominal impedance: 8 ohms
Crossover frequency: 2200 Hz
Sensitivity ( 2V / 1m ): 85 dB
Recommended power amplification: 50 - 150 W
Dimensions (HxWxD): 912 x 180 x 250 mm
Net weight (1 unit): 21 kg
Condition : Pre-Owned, Mint
Price : Rp 26.000.000,-
MADE IN CZECH REPUBLIC
Technical Specifications:
Mid-bass frequency unit: 148 mm Scan-Speak Revelator, paper membrane, SD-1 "motor".
High frequency unit: 29 mm Scan-Speak impregnated fabric soft dome, low - distortion "motor" no ferrofluid.
System type: 2-ways damped bass-reflex, massive aluminium bass-reflex port.
Cabinet: 22 mm MDF handly crafted.
Frequency response: ( -3 dB on reference axis ): 47 - 32000 Hz
Connection: 1 pair of singly mounted WBT Platinum
Signature binding posts.
Nominal impedance: 8 ohms
Crossover frequency: 2200 Hz
Sensitivity ( 2V / 1m ): 85 dB
Recommended power amplification: 50 - 150 W
Dimensions (HxWxD): 912 x 180 x 250 mm
Net weight (1 unit): 21 kg
Condition : Pre-Owned, Mint
Price : Rp 26.000.000,-
Bookshelf Speaker
BOHLENDER & GRAEBENER Z1
MADE IN USA
Description : Monitor/ Bookshelf
Frequency Response : (-6 dB, half space) 55 Hz-25 kHz
Woofer : 5.25” Aluminum Cone, shielded
Tweeter : Neo3 PDR
Sensitivity : 88 dB/2.83V/1m
Impedance : 8 ohms
Power Handling : 100 watts
Dimensions (HxWxD) : 13” x 7.1” x 9.5”
Weight : 13 lbs.
Condition : Brand new
Price : Rp 6.500.000,-
MADE IN USA
Description : Monitor/ Bookshelf
Frequency Response : (-6 dB, half space) 55 Hz-25 kHz
Woofer : 5.25” Aluminum Cone, shielded
Tweeter : Neo3 PDR
Sensitivity : 88 dB/2.83V/1m
Impedance : 8 ohms
Power Handling : 100 watts
Dimensions (HxWxD) : 13” x 7.1” x 9.5”
Weight : 13 lbs.
Condition : Brand new
Price : Rp 6.500.000,-
Floorstand Speaker
KEF XQ5
MADE IN UK
Specifications :
System type: Four-way, floor standing
Enclosure type: Reflex
Nominal impedance: 8 ohms (3.2 min.)
Amplifier requirements: 15-150W
Frequency response: 45Hz to 55kHz +/-3.0dB
Sensitivity: 90dB at 1m for 2.83V
Maximum output: 112dB
System: SP3395
Drive Units:
2 x B160 Bass unit (SP1395),
B160 Uni-Q (SP1485) [NT19 tweeter (SP1487)],
NT19 Hypertweeter (SP1476)
Crossover: SP2398 and SP2399
Dimensions (H x W x D): 1055 x 231 x 311mm
Weight: 24.3kg
Condition : Pre-Owned, Mint
Price :
MADE IN UK
Specifications :
System type: Four-way, floor standing
Enclosure type: Reflex
Nominal impedance: 8 ohms (3.2 min.)
Amplifier requirements: 15-150W
Frequency response: 45Hz to 55kHz +/-3.0dB
Sensitivity: 90dB at 1m for 2.83V
Maximum output: 112dB
System: SP3395
Drive Units:
2 x B160 Bass unit (SP1395),
B160 Uni-Q (SP1485) [NT19 tweeter (SP1487)],
NT19 Hypertweeter (SP1476)
Crossover: SP2398 and SP2399
Dimensions (H x W x D): 1055 x 231 x 311mm
Weight: 24.3kg
Condition : Pre-Owned, Mint
Price :
Floorstand Speaker
PSB IMAGE T65
MADE IN CANADA
-----SOLD------
MADE IN CANADA
-----SOLD------
Bookshelf Speaker
AUDIONOTE AX TWO
MADE IN DENMARK
Descriptions :
2 way rear ported enclosure, ¾” tweeter, 6” bass driver, 90dB efficient
---SOLD----
MADE IN DENMARK
Descriptions :
2 way rear ported enclosure, ¾” tweeter, 6” bass driver, 90dB efficient
---SOLD----
Floorstand Speaker
NEAT ACOUSTICS
ULTIMATUM MF5
MADE IN UK
Specifications :
Dimensions: 100x22x37cm (hwd).
Plinth footprint: 35x51cm (wd).
Enclosure type: Multi chamber, milti driver array, incorporating iso-baric internal cavities, plus upward firing super-tweeters.
Sensitivity: 88db/1 watt.
Recommended amplifier power: 25 - 200watts.
Impedance: 6 ohms average. Minimum 4 ohms.
Weight: 38kg each.
Condition : Pre-Owned, Mint
Price :
ULTIMATUM MF5
MADE IN UK
Specifications :
Dimensions: 100x22x37cm (hwd).
Plinth footprint: 35x51cm (wd).
Enclosure type: Multi chamber, milti driver array, incorporating iso-baric internal cavities, plus upward firing super-tweeters.
Sensitivity: 88db/1 watt.
Recommended amplifier power: 25 - 200watts.
Impedance: 6 ohms average. Minimum 4 ohms.
Weight: 38kg each.
Condition : Pre-Owned, Mint
Price :
Bookshelf Speaker
ELECTROCOMPANIET PRELUDE PBS-1
MADE IN USA
SPECIFICATIONS :
· Type: Two-way, rear-vented loudspeaker
· High-gloss black
· Sound excellent balanced, detailed, punchy and spatially
· Fabric tweeter with adopted volume
· Bass / midrange with coated paper cone
· High-quality, phase-optimized crossover
· Magnetic fabric-covered frame
· Driver complement: 1” silk dome tweeter; 6.5” coated paper bass/midrange
· Frequency response: 55Hz–20kHz
· Sensitivity: 87dB
· Impedance: 4 ohms
· Recommended amplifier power: 70–110Wpc
· Dimensions: 5.6” x 11.5” x 10.2”
· Weight: 11.2 lbs.
Condition : Pre-Owned, Mint
Price : Rp 7.900.000,-
MADE IN USA
SPECIFICATIONS :
· Type: Two-way, rear-vented loudspeaker
· High-gloss black
· Sound excellent balanced, detailed, punchy and spatially
· Fabric tweeter with adopted volume
· Bass / midrange with coated paper cone
· High-quality, phase-optimized crossover
· Magnetic fabric-covered frame
· Driver complement: 1” silk dome tweeter; 6.5” coated paper bass/midrange
· Frequency response: 55Hz–20kHz
· Sensitivity: 87dB
· Impedance: 4 ohms
· Recommended amplifier power: 70–110Wpc
· Dimensions: 5.6” x 11.5” x 10.2”
· Weight: 11.2 lbs.
Condition : Pre-Owned, Mint
Price : Rp 7.900.000,-
Bookshelf Speaker
PROAC RESPONSE D ONE
MADE IN ENGLAND
Technical Info :
Nominal Impedance
8 ohms
Recommended Amplifiers
20 to 100 watts
Frequency Response
38Hz to 30kHz
Sensitivity
87.5 db linear for 1 watt at 1 metre
Cabinet
Heavy, inert construction damped with special material and featuring slim, rigid front baffle design to aid dispersion.
Bass/Midrange Driver
New 5" (130mm) ProAc unit featuring glass fibre weave cone, raised spider assembly, EXCEL magnet system and unique acrylic damping phase plug.
Tweeter
ProAc ¾ dome unit with honeycomb wound voice coil, special damping and ferrofluid-cooled coil assembly.
Crossover
Finest components on dedicated circuit board with multistrand oxygen-free copper cable throughout. Split for optional bi-wiring/bi-amping.
Dimensions
12" (305mm) high
6 5/8" (168mm) wide
10 1/4" (260mm) deep including grille thickness of 12mm
Weight
20lbs (9 Kgs)
Mode
Stand mounted
Grille
Acoustically transparent crimplene
Condition : Pre-Owned, Mint
Price : Rp 18.000.000,-
MADE IN ENGLAND
Technical Info :
Nominal Impedance
8 ohms
Recommended Amplifiers
20 to 100 watts
Frequency Response
38Hz to 30kHz
Sensitivity
87.5 db linear for 1 watt at 1 metre
Cabinet
Heavy, inert construction damped with special material and featuring slim, rigid front baffle design to aid dispersion.
Bass/Midrange Driver
New 5" (130mm) ProAc unit featuring glass fibre weave cone, raised spider assembly, EXCEL magnet system and unique acrylic damping phase plug.
Tweeter
ProAc ¾ dome unit with honeycomb wound voice coil, special damping and ferrofluid-cooled coil assembly.
Crossover
Finest components on dedicated circuit board with multistrand oxygen-free copper cable throughout. Split for optional bi-wiring/bi-amping.
Dimensions
12" (305mm) high
6 5/8" (168mm) wide
10 1/4" (260mm) deep including grille thickness of 12mm
Weight
20lbs (9 Kgs)
Mode
Stand mounted
Grille
Acoustically transparent crimplene
Condition : Pre-Owned, Mint
Price : Rp 18.000.000,-
Center Speaker
TOTEM RAINMAKER
MADE IN CANADA
Description :
• Exclusively designed dome tweeter and an ultra-light solid-cast frame woofer
• Borosilicate dampening
• Full-plane vertical cross bracing (2) for extreme rigidity and increased control
• Aesthetic, acoustical finish
• Solid twin pair gold plated terminals / Bi-wireable
• No compromise drivers, wiring and crossover parts
• Fully shielded
• Frequency Response 44 Hz - 20 kHz ± 3 dB
• Impedance 8 ohms
• Sensitivity 87.5 dB/W/m.
• Minimum Power 30 W
• Maximum Power 120 W
• Crossover 2.3 kHz 2nd order
• Woofer 2 x 5 1/2”
• Tweeter 1”
• Dimensions 6.8h x 23.7wx 9d” approx. size
173 x 602 x 230 mm
• Volume: 15 litres (internal)
• Weight: 9.5 kg (approx. 20lbs )
Condition : Pre-Owned, Mint
Price : Rp 7.000.000,-
MADE IN CANADA
Description :
• Exclusively designed dome tweeter and an ultra-light solid-cast frame woofer
• Borosilicate dampening
• Full-plane vertical cross bracing (2) for extreme rigidity and increased control
• Aesthetic, acoustical finish
• Solid twin pair gold plated terminals / Bi-wireable
• No compromise drivers, wiring and crossover parts
• Fully shielded
• Frequency Response 44 Hz - 20 kHz ± 3 dB
• Impedance 8 ohms
• Sensitivity 87.5 dB/W/m.
• Minimum Power 30 W
• Maximum Power 120 W
• Crossover 2.3 kHz 2nd order
• Woofer 2 x 5 1/2”
• Tweeter 1”
• Dimensions 6.8h x 23.7wx 9d” approx. size
173 x 602 x 230 mm
• Volume: 15 litres (internal)
• Weight: 9.5 kg (approx. 20lbs )
Condition : Pre-Owned, Mint
Price : Rp 7.000.000,-
Bookshelf Speaker
HARBETH P3ESR
MADE IN ENGLAND
SPECIFICATIONS :
Transducer system 2-way: Harbeth 110mm RADIAL2™ mid/bass; 19mm Ferro-cooled tweeter with HexGrille.
Freq. response 75Hz - 20kHz +/-3dB free space, 1m with grille on with smooth off-axis response.
Impedance 6 ohms - easy to drive.
Sensitivity 83.5db/1W/1m
Amp. suggestion Works with a wide range of amplifiers, ideally from 15W/channel.
Power handling 50W programme
Connector Two 4mm gold-plated binding posts for wires or plugs
Dimensions (hxwxd) 306 x 189 x 202 mm (inl. grille and terminals)
Finish Rosewood
Space needs Ideally > 0.30m from rear wall
Stands Typically 24+ inches
Weight 6.3kg each (without packing)
Packing One matched pair per protective carton
----SOLD-----
MADE IN ENGLAND
SPECIFICATIONS :
Transducer system 2-way: Harbeth 110mm RADIAL2™ mid/bass; 19mm Ferro-cooled tweeter with HexGrille.
Freq. response 75Hz - 20kHz +/-3dB free space, 1m with grille on with smooth off-axis response.
Impedance 6 ohms - easy to drive.
Sensitivity 83.5db/1W/1m
Amp. suggestion Works with a wide range of amplifiers, ideally from 15W/channel.
Power handling 50W programme
Connector Two 4mm gold-plated binding posts for wires or plugs
Dimensions (hxwxd) 306 x 189 x 202 mm (inl. grille and terminals)
Finish Rosewood
Space needs Ideally > 0.30m from rear wall
Stands Typically 24+ inches
Weight 6.3kg each (without packing)
Packing One matched pair per protective carton
----SOLD-----
Bookshelf Speaker
DYNAUDIO FOCUS 140
MADE IN DENMARK
Description:
Two-way, reflex-loaded, stand-mounted loudspeaker. Drive-units: 1.1" soft-dome tweeter, 5.5" plastic-cone woofer. Crossover frequency: 2.4kHz, first-order slopes. Frequency range: 41Hz–25kHz. Nominal impedance: 4 ohms. Sensitivity: 86dB/2.83V/m.
Dimensions: 13.65" (350mm) H by 7.9" (203mm) W by 11.5" (295mm) D. Weight: 18.7 lbs (8.5 kg).
----SOLD-----
MADE IN DENMARK
Description:
Two-way, reflex-loaded, stand-mounted loudspeaker. Drive-units: 1.1" soft-dome tweeter, 5.5" plastic-cone woofer. Crossover frequency: 2.4kHz, first-order slopes. Frequency range: 41Hz–25kHz. Nominal impedance: 4 ohms. Sensitivity: 86dB/2.83V/m.
Dimensions: 13.65" (350mm) H by 7.9" (203mm) W by 11.5" (295mm) D. Weight: 18.7 lbs (8.5 kg).
----SOLD-----
B&W CDM-1NT
MADE IN UK
SPECIFICATIONS :
* Impedance : 8
* Bi-Wiring Compatible
* Power admitted (W) : 120
* Tweeter : 25 mm
* Medium : 165 mm
* Bandwith : 60Hz – 25 kHz
* Sensibility (dB/W/m) : 88.0
* Dimensions : 393 x 220 × 308 mm
* Weight : 9.5 kg
----SOLD-----
MADE IN UK
SPECIFICATIONS :
* Impedance : 8
* Bi-Wiring Compatible
* Power admitted (W) : 120
* Tweeter : 25 mm
* Medium : 165 mm
* Bandwith : 60Hz – 25 kHz
* Sensibility (dB/W/m) : 88.0
* Dimensions : 393 x 220 × 308 mm
* Weight : 9.5 kg
----SOLD-----
Floorstand Speaker
KHARMA CRM 3.2 FE
MADE IN NETHERLANDS
Specifications:
· Type: Two-way floor-standing dynamic loudspeaker
· Drivers: 1.5" inverted-dome titanium tweeter, 7" concave ceramic mid-bass
· Power Handling: 100 watts
· Frequency Response: 35Hz - 25kHz, -3dB
· Crossover: 1.75kHz
· Sensitivity: 89 dB (1W/1m)
· Impedance: 8 ohms
· Dimensions: 36" h x 16" d x 12" w
· Weight: 70 pounds
----SOLD---
MADE IN NETHERLANDS
Specifications:
· Type: Two-way floor-standing dynamic loudspeaker
· Drivers: 1.5" inverted-dome titanium tweeter, 7" concave ceramic mid-bass
· Power Handling: 100 watts
· Frequency Response: 35Hz - 25kHz, -3dB
· Crossover: 1.75kHz
· Sensitivity: 89 dB (1W/1m)
· Impedance: 8 ohms
· Dimensions: 36" h x 16" d x 12" w
· Weight: 70 pounds
----SOLD---
Floorstand Speaker
PROAC STUDIO 140
MADE IN UK
Technical Info :
Nominal Impedance 8 ohms, minimum 4 ohms
Recommended Amplifiers 15 to 250 watts
Frequency Response 25hz to 30Khz
Sensitivity 91db linear for 1 watt at 1 metre
Bass/Midrange
Bass Driver 2 x new 165mm (61/2”) ProAc unit
with coated cone raised spider assembly for
greater linearity and large shielded magnet
assembly.
Tweeter 1" (25mm) coated silk dome with special
coating and inner damping.
Crossover HQ network using the finest components
with option for bi-amping/bi-wiring and
utilising oxygen free cable.
Dimensions 41" (1040mm) high on plinth & spikes
7.5" (190mm) wide
11" (280mm) deep
Weight 20kg each with spikes and plinths
Mode Floor standing with spikes
Grille Acoustically transparent crimplene
Finish Mahogany
-----SOLD----
MADE IN UK
Technical Info :
Nominal Impedance 8 ohms, minimum 4 ohms
Recommended Amplifiers 15 to 250 watts
Frequency Response 25hz to 30Khz
Sensitivity 91db linear for 1 watt at 1 metre
Bass/Midrange
Bass Driver 2 x new 165mm (61/2”) ProAc unit
with coated cone raised spider assembly for
greater linearity and large shielded magnet
assembly.
Tweeter 1" (25mm) coated silk dome with special
coating and inner damping.
Crossover HQ network using the finest components
with option for bi-amping/bi-wiring and
utilising oxygen free cable.
Dimensions 41" (1040mm) high on plinth & spikes
7.5" (190mm) wide
11" (280mm) deep
Weight 20kg each with spikes and plinths
Mode Floor standing with spikes
Grille Acoustically transparent crimplene
Finish Mahogany
-----SOLD----
Bookshelf Speaker
STIRLING LS3/5A V2
MADE IN UK
The new Stirling BBC LS3/5a V2 has been designed by Stirling Broadcast to meet the exacting requirements of the BBC LS3/5a specification. This newly released version of the monitor classics utilises new Stirling SB4424 and SB4428 drivers with a very hi-grade ‘SuperSpec’ crossover, all housed in thin-walled reference cabinets modelled after the famous 001/002 pair featured in Hi-Fi News.
Specifications :
- System type: Two-way infinite baffle (sealed box)
- Frequency response: 78Hz – 20kHz + 3dB
- Sensitivity: 83dB for 2.83V @ 1m
- Nominal impedance: 11 ohm
- Bass/Midrange driver: Stirling SB4424 computer matched
- Tweeter: Stirling SB4428 computer matched
- Crossover: Stirling SuperSpec V2, bi-wireable
- Dimensions: 302 x 188 x 168 Weight: 4.2 kg each
----SOLD-----
MADE IN UK
The new Stirling BBC LS3/5a V2 has been designed by Stirling Broadcast to meet the exacting requirements of the BBC LS3/5a specification. This newly released version of the monitor classics utilises new Stirling SB4424 and SB4428 drivers with a very hi-grade ‘SuperSpec’ crossover, all housed in thin-walled reference cabinets modelled after the famous 001/002 pair featured in Hi-Fi News.
Specifications :
- System type: Two-way infinite baffle (sealed box)
- Frequency response: 78Hz – 20kHz + 3dB
- Sensitivity: 83dB for 2.83V @ 1m
- Nominal impedance: 11 ohm
- Bass/Midrange driver: Stirling SB4424 computer matched
- Tweeter: Stirling SB4428 computer matched
- Crossover: Stirling SuperSpec V2, bi-wireable
- Dimensions: 302 x 188 x 168 Weight: 4.2 kg each
----SOLD-----
Bookshelf Speaker
B&W 685
Specifications :
Bass port? Yes (front)
Biwireable? Yes
Connections 4mm banana plug/binding posts
Crossover frequency (kHz) 4
Drivers HF: 25mm aluminium dome
LF: 165mm woven Kevlar® cone
Frequency response (Hz) 49 - 22,000
Magnetically shielded? No
Nominal impedance (ohms) 8
Recommended amp power (watts) 25 - 100 (8 ohms RMS)
Sensitivity (dB) 88
W x H x D (mm) 198 x 340 x 331
Weight (kg) 7
-----SOLD------
Specifications :
Bass port? Yes (front)
Biwireable? Yes
Connections 4mm banana plug/binding posts
Crossover frequency (kHz) 4
Drivers HF: 25mm aluminium dome
LF: 165mm woven Kevlar® cone
Frequency response (Hz) 49 - 22,000
Magnetically shielded? No
Nominal impedance (ohms) 8
Recommended amp power (watts) 25 - 100 (8 ohms RMS)
Sensitivity (dB) 88
W x H x D (mm) 198 x 340 x 331
Weight (kg) 7
-----SOLD------
Bookshelf Speaker
B&W DM600 S3
Description 2-way vented-box system
Dimensions Height: 286mm (11.3in)
Width: 175mm (6.9in)
Depth: 219mm (8.6in)
Net Weight 4.0kg / 8.8lb
Freq. Response 75Hz - 22kHz ± 3dB on reference axis
Freq. Range -6dB at 55Hz and 42kHz
Sensitivity 88dB spl (2.83V 1m)
Normal Impedance 8 ohms (minimum 3.0 ohms)
Power Handling 25W - 100W into 8 ohms on unclipped programme
----SOLD---
Description 2-way vented-box system
Dimensions Height: 286mm (11.3in)
Width: 175mm (6.9in)
Depth: 219mm (8.6in)
Net Weight 4.0kg / 8.8lb
Freq. Response 75Hz - 22kHz ± 3dB on reference axis
Freq. Range -6dB at 55Hz and 42kHz
Sensitivity 88dB spl (2.83V 1m)
Normal Impedance 8 ohms (minimum 3.0 ohms)
Power Handling 25W - 100W into 8 ohms on unclipped programme
----SOLD---
Floorstand Speaker
VIENNA ACOUSTICS GRAND MOZART
MADE IN AUSTRIA
General info
Enclosure type: Vented (bass reflex) Port (bass reflex) location: Rear
Frequency range: 32Hz - 22kHz
Recommended power: 30W - 200W
Sensitivity: 90dB at 2.83V/1m
Nominal impedance: 4 ohms
Number of drivers: 3
Number of frequency bands: 2.5-way
Woofer/Midbass: 2 x 6.0 in Tweeter: 1 x 25.4 mm
Tweeter type: (Soft) dome
Dimensions (WxHxD): 8.50 in x 38.25 in x 13.50 in Weight: 114.00 lb
-----SOLD----
MADE IN AUSTRIA
General info
Enclosure type: Vented (bass reflex) Port (bass reflex) location: Rear
Frequency range: 32Hz - 22kHz
Recommended power: 30W - 200W
Sensitivity: 90dB at 2.83V/1m
Nominal impedance: 4 ohms
Number of drivers: 3
Number of frequency bands: 2.5-way
Woofer/Midbass: 2 x 6.0 in Tweeter: 1 x 25.4 mm
Tweeter type: (Soft) dome
Dimensions (WxHxD): 8.50 in x 38.25 in x 13.50 in Weight: 114.00 lb
-----SOLD----
Floorstand Speaker
PROAC RESPONSE 3
MADE IN UK
SPECIFICATION:
Nominal Impedance: 8 ohms
Recommended Amplifiers: 20 to 250 watts
Frequency Response: 20hz to 25Khz
Sensitivity: 88db linear for 1 watt at 1 metre
Bass/Midrange Driver: ProAc 61⁄2” (165mm) polypropylene unit in die-cast chassis
with special damping, designed in conjunction with
Scanspeak of Denmark. Special voice coil, pole piece,
dustcap and magnet assembly.
Tweeter: 1” (25mm) dome with special coating and unique rear
loading. Ferrofluid-cooled coil assembly.
Crossover: Highest quality components. A refined version of the
design used in the Response One and Two models.
Dimensions: 47” (1194mm) high (on plinth).
11” (279mm) wide
12” (304mm) deep
Mode: Floorstanding on special plinths.
Grille: Acoustically transparent.
Finish: Walnut
----SOLD------
MADE IN UK
SPECIFICATION:
Nominal Impedance: 8 ohms
Recommended Amplifiers: 20 to 250 watts
Frequency Response: 20hz to 25Khz
Sensitivity: 88db linear for 1 watt at 1 metre
Bass/Midrange Driver: ProAc 61⁄2” (165mm) polypropylene unit in die-cast chassis
with special damping, designed in conjunction with
Scanspeak of Denmark. Special voice coil, pole piece,
dustcap and magnet assembly.
Tweeter: 1” (25mm) dome with special coating and unique rear
loading. Ferrofluid-cooled coil assembly.
Crossover: Highest quality components. A refined version of the
design used in the Response One and Two models.
Dimensions: 47” (1194mm) high (on plinth).
11” (279mm) wide
12” (304mm) deep
Mode: Floorstanding on special plinths.
Grille: Acoustically transparent.
Finish: Walnut
----SOLD------
VIENNA ACOUSTIC GRAND MOZART SYMPHONI EDITION
MADE IN AUSTRIA
SPECIFICATIONS :
Type: 2.5-way bass-reflex tower
Drivers: 1.1" tweeter, 5" X3P mid/bass, 5" XPP Spider-Cone mid/woofer
Frequency response: 30Hz to 22kHz
Sensitivity: 90dB
Nominal impedance: 4 ohms
Dimensions: 38.25" x 8.1" x 13" (including supplied base)
Weight: 116 lbs./pair
-----SOLD----
MADE IN AUSTRIA
SPECIFICATIONS :
Type: 2.5-way bass-reflex tower
Drivers: 1.1" tweeter, 5" X3P mid/bass, 5" XPP Spider-Cone mid/woofer
Frequency response: 30Hz to 22kHz
Sensitivity: 90dB
Nominal impedance: 4 ohms
Dimensions: 38.25" x 8.1" x 13" (including supplied base)
Weight: 116 lbs./pair
-----SOLD----
Bookshelf Speaker
AUDIO NOTE AX ONE
HANDMADE IN DENMARK
The AX One range as designed as a general purpose small loudspeakers, and will work well with almost any amplifier.
2-way folded parabolic rear loaded quarter wave quasi horn, ¾” tweeter, 5” bass driver, 88dB efficient
----SOLD----
HANDMADE IN DENMARK
The AX One range as designed as a general purpose small loudspeakers, and will work well with almost any amplifier.
2-way folded parabolic rear loaded quarter wave quasi horn, ¾” tweeter, 5” bass driver, 88dB efficient
----SOLD----
B&W 705
MADE IN UK
----SOLD----
MADE IN UK
----SOLD----
Bookshelf Speaker
B&W 805 NAUTILUS
MADE IN UK
SPECIFICATIONS :
* Impedance : 8
* Bi-Wiring Compatible
* Power admitted (W) : 120
* Tweeter : 25 mm
* Boomer : 165 mm
* Bandwith : 56Hz – 20 kHz
* Sensibility (dB/W/m) : 88.0
* Dimensions : 415 × .238 x 344
* Weight : 9.0 kg
-----SOLD----
MADE IN UK
SPECIFICATIONS :
* Impedance : 8
* Bi-Wiring Compatible
* Power admitted (W) : 120
* Tweeter : 25 mm
* Boomer : 165 mm
* Bandwith : 56Hz – 20 kHz
* Sensibility (dB/W/m) : 88.0
* Dimensions : 415 × .238 x 344
* Weight : 9.0 kg
-----SOLD----
Floorstand Speaker
ROCKPORT MIRA
MADE IN USA
Specifications :
Retail Price: US$ 15,999
Floorstanding, 3-way vented loudspeaker
Driver complement: 1.1" soft-dome tweeter, 5.25" mid/bass driver, 10" side-firing woofer
Frequency response: 30Hz - 20kHz
Sensitivity: 88dB
Impedance: 4 ohms
Recommended amplifier power: 50 watts minimum
Dimensions: 10.25" x 44.75" x 19.5"
Weight: 115 lbs. each / 52.16 kg each
----SOLD----
MADE IN USA
Specifications :
Retail Price: US$ 15,999
Floorstanding, 3-way vented loudspeaker
Driver complement: 1.1" soft-dome tweeter, 5.25" mid/bass driver, 10" side-firing woofer
Frequency response: 30Hz - 20kHz
Sensitivity: 88dB
Impedance: 4 ohms
Recommended amplifier power: 50 watts minimum
Dimensions: 10.25" x 44.75" x 19.5"
Weight: 115 lbs. each / 52.16 kg each
----SOLD----
Floorstand Speaker
ROCKPORT MIRA GRAND II
MADE IN USA
Specifications:
Retail Price : US$35,500 per pair
Type: 3-way 5-driver full-range loudspeaker
Drivers: 1 x 1-inch Ring Radiator, 2 x 5.25-inch Audiotechnology midrange, 2 x 10-inch ultra stiff paper woofer
Frequency response: 30 ~ 40kHz, -3dB
Sensitivity: 90dB SPL/2.83v
Nominal impedance: 4Ω
Minimum amplifier power: 50 watts
Dimensions: 68.77H x 17.32W (base) x 23.14D (base)(inch)
Weight: 220 lbs. each
-----SOLD----
MADE IN USA
Specifications:
Retail Price : US$35,500 per pair
Type: 3-way 5-driver full-range loudspeaker
Drivers: 1 x 1-inch Ring Radiator, 2 x 5.25-inch Audiotechnology midrange, 2 x 10-inch ultra stiff paper woofer
Frequency response: 30 ~ 40kHz, -3dB
Sensitivity: 90dB SPL/2.83v
Nominal impedance: 4Ω
Minimum amplifier power: 50 watts
Dimensions: 68.77H x 17.32W (base) x 23.14D (base)(inch)
Weight: 220 lbs. each
-----SOLD----
Bookshelf Speaker
PROAC RESPONSE 1SC
MADE IN UK
Nominal Impedance : 8 ohms
Recommended Amplifiers : 20 to 100 watts
Frequency Response : 38hz to 30Khz
Sensitivity : 86db linear for 1 watt at 1 metre
Bass/Midrange : New five inch unit with special transparent cone. Copper magnet assembly and phase plug mounted on die-cast chassis. High temperature voice coil.
Tweeter : ProAc three quarter inch dome unit, with honeycomb - wound voice coil.
Special damping and ferrofluid-cooled coil assembly.
Crossover :Finest components on dedicated circuit board. Multistrand oxygen-free copper cable throughout. Split for optional bi-wiring and bi-amping.
Dimensions :12" (305mm) high ; 7" (178mm) wide ; 9 1/4" (235mm) deep
Weight :18lbs (8kg)/cabinet
Mode :Stand mounted
Grille :Acoustically transparent crimplene
----SOLD---
MADE IN UK
Nominal Impedance : 8 ohms
Recommended Amplifiers : 20 to 100 watts
Frequency Response : 38hz to 30Khz
Sensitivity : 86db linear for 1 watt at 1 metre
Bass/Midrange : New five inch unit with special transparent cone. Copper magnet assembly and phase plug mounted on die-cast chassis. High temperature voice coil.
Tweeter : ProAc three quarter inch dome unit, with honeycomb - wound voice coil.
Special damping and ferrofluid-cooled coil assembly.
Crossover :Finest components on dedicated circuit board. Multistrand oxygen-free copper cable throughout. Split for optional bi-wiring and bi-amping.
Dimensions :12" (305mm) high ; 7" (178mm) wide ; 9 1/4" (235mm) deep
Weight :18lbs (8kg)/cabinet
Mode :Stand mounted
Grille :Acoustically transparent crimplene
----SOLD---
B&W DM602 S2
MADE IN UK
----SOLD----
MADE IN UK
----SOLD----
ROGERS EXPORT MONITOR (LS3/6)
MADE IN UK
----SOLD-----
MADE IN UK
----SOLD-----
Bookshelf Speaker
PMC TB2+
MADE IN UK
Specifications :
Dimensions (LxWxH) 400 x 200 x 300 mm
Power (RMS) 150 W
Sound pressure level (SPL) 113dB SPL
Impedance 8 Ohms
Sensitivity 90dB
Frequency range 40-25000Hz
----SOLD---
MADE IN UK
Specifications :
Dimensions (LxWxH) 400 x 200 x 300 mm
Power (RMS) 150 W
Sound pressure level (SPL) 113dB SPL
Impedance 8 Ohms
Sensitivity 90dB
Frequency range 40-25000Hz
----SOLD---
Floorstand Speaker
VENTURE LA PERFECTION
MADE IN BELGIUM
SPECIFICATIONS :
----SOLD---
MADE IN BELGIUM
SPECIFICATIONS :
- Frequency Response: 30 - 35.000 Hz
- Sensitivity: 90 dB
- Impedance: 4 Ohm nominal
----SOLD---
Floorstand Speaker
SONUS FABER CREMONA
MADE IN ITALY
Specifications :
System Type: 3-way, Lute-shaped cabinet
Cabinet: 32 individual layers of solid
and laminated maple
Driver Complement
Woofer: 2 x 7 in. (180mm) sliced hard
paper cone with Symmetric
drive motor
Midrange: 6 in. (150mm) sliced hard paper
cone with Symmetric Drive motor
Tweeter: 1 in. (25mm) high-resolution Ring
Radiator with copper cap motor
Crossover: 300Hz / 3khz, non-resonant acoustic first-order, optimized acoustic phase
response, grade components
Frequency Response: 32Hz - 40kHz
Impedance: 4 ohms, nominal
Sensitivity: 90dB 1W/1m, 2.83V
Power Handling: 50-300W, without clipping
Finish: Maple
Dimensions: 8.9 x 17 x 42.9 inches (WDH)
225 x 430 x 1090 mm (WDH)
Weight: 72 kg / pr
----SOLD---
MADE IN ITALY
Specifications :
System Type: 3-way, Lute-shaped cabinet
Cabinet: 32 individual layers of solid
and laminated maple
Driver Complement
Woofer: 2 x 7 in. (180mm) sliced hard
paper cone with Symmetric
drive motor
Midrange: 6 in. (150mm) sliced hard paper
cone with Symmetric Drive motor
Tweeter: 1 in. (25mm) high-resolution Ring
Radiator with copper cap motor
Crossover: 300Hz / 3khz, non-resonant acoustic first-order, optimized acoustic phase
response, grade components
Frequency Response: 32Hz - 40kHz
Impedance: 4 ohms, nominal
Sensitivity: 90dB 1W/1m, 2.83V
Power Handling: 50-300W, without clipping
Finish: Maple
Dimensions: 8.9 x 17 x 42.9 inches (WDH)
225 x 430 x 1090 mm (WDH)
Weight: 72 kg / pr
----SOLD---
Floorstand Speaker
CANTON KARAT M40 DC
MADE IN GERMANY
As the only member of the family Karat Karat M 40 DC has in front of two 16-inch chassis with aluminum cone for the middle and bass. This special arrangement underscores the slim proportions of the speaker. The tweeter is a system with 25-mm aluminum-manganese dome used.
-----SOLD----
MADE IN GERMANY
As the only member of the family Karat Karat M 40 DC has in front of two 16-inch chassis with aluminum cone for the middle and bass. This special arrangement underscores the slim proportions of the speaker. The tweeter is a system with 25-mm aluminum-manganese dome used.
- Type: Floorstanding Speakers
- Principle: 3-way bass reflex system
- Power Handling: 120/200 watts
- Frequency response: 25 30,000 Hz ..
- Crossover frequency: 300/3.000 Hz
- Woofer: 160 mm, aluminum-manganese membrane
- Midrange: 160 mm, aluminum-manganese membrane
- Tweeter: 25 mm, aluminum-manganese dome tweeter
- Impedance: 4 ohms 8 ..
- Dimensions (WxHxD): 17 x 100 x 31 cm
- Finish: Silver lacquer
- Cover: fabric cover black
- Special features: gilded bi-wiring/bi-amping screwclamp terminals, DC-technology
-----SOLD----
Floorstand Speaker
ACOUSTIC ENERGY AEGIS THREE
SPECIFICATIONS :
Power handling: 150 watts
Sensitivity: 90 dB
Impedance: 8 ohms
HxWxD (mm) / Weight: 880 x 192 x 220 / 8 Kg
Frequency response: 33 - 22000 kHz
Biwireable? Yes
Connections: 4mm banana plug/binding post.
Bass port? Rear ported
Drivers: HF: 25mm silk domed, MF: 130mm metal alloy, LF: 180mm polypropylene
Extra: Plinths and mass-loaded cabinet base.
----SOLD---
SPECIFICATIONS :
Power handling: 150 watts
Sensitivity: 90 dB
Impedance: 8 ohms
HxWxD (mm) / Weight: 880 x 192 x 220 / 8 Kg
Frequency response: 33 - 22000 kHz
Biwireable? Yes
Connections: 4mm banana plug/binding post.
Bass port? Rear ported
Drivers: HF: 25mm silk domed, MF: 130mm metal alloy, LF: 180mm polypropylene
Extra: Plinths and mass-loaded cabinet base.
----SOLD---
Floorstanding Speaker
KEF iQ90
Model iQ90
Design Three-way bass reflex
Drive Units 2 x 165mm LF,
165mm Uni-Q,
19mm aluminium dome HF
Crossover Frequencies 180Hz, 2.5kHz
Sensitivity (2.83V/1m) 91dB
Maximum Output 113dB
Input Impedance 8 Ohms
Amplifier Requirements 15-200W
Magnetic Shielding Yes
Frequency Range 33Hz - 40kHz
Plinth Dimensions 28 x 288 x 348 mm
Weight 16.3kg (35.9lbs)
Dimensions 942 x 220 x 327 mm
Finishes Black Ash
----SOLD---
Model iQ90
Design Three-way bass reflex
Drive Units 2 x 165mm LF,
165mm Uni-Q,
19mm aluminium dome HF
Crossover Frequencies 180Hz, 2.5kHz
Sensitivity (2.83V/1m) 91dB
Maximum Output 113dB
Input Impedance 8 Ohms
Amplifier Requirements 15-200W
Magnetic Shielding Yes
Frequency Range 33Hz - 40kHz
Plinth Dimensions 28 x 288 x 348 mm
Weight 16.3kg (35.9lbs)
Dimensions 942 x 220 x 327 mm
Finishes Black Ash
----SOLD---
Floorstand Speaker
PMC EB1i
MADE IN UK
EB1 specifications :
Freq Response 19Hz-25kHz
Peak SPL @ 1M 114dB
Effective Line Length 3m (9.84ft)
Drive Units LF PMC 10” / 250mm Carbon fibre & Nomex™ Piston
MF 75mm Fabric soft dome HF 27mm fabric soft dome with ferro fluid cooling
Crossover Frequency 380Hz & 3.8kHz
Finish Cherry or Walnut
Dimensions H 1200mm + 25mm spikes (47.2” + 1”) 294mm (11.8”)
D 465mm + 12mm grille (18.3” + 0.47”)
Weight 48 kg per unit (105.6 lbs)
Input connection 3 pairs 4mm binding posts for Tri-Amp or Tri-Wire
Input Impedance 4 Ohms nominal
Sensitivity 89 dB 1W @ 1M
------SOLD----
MADE IN UK
EB1 specifications :
Freq Response 19Hz-25kHz
Peak SPL @ 1M 114dB
Effective Line Length 3m (9.84ft)
Drive Units LF PMC 10” / 250mm Carbon fibre & Nomex™ Piston
MF 75mm Fabric soft dome HF 27mm fabric soft dome with ferro fluid cooling
Crossover Frequency 380Hz & 3.8kHz
Finish Cherry or Walnut
Dimensions H 1200mm + 25mm spikes (47.2” + 1”) 294mm (11.8”)
D 465mm + 12mm grille (18.3” + 0.47”)
Weight 48 kg per unit (105.6 lbs)
Input connection 3 pairs 4mm binding posts for Tri-Amp or Tri-Wire
Input Impedance 4 Ohms nominal
Sensitivity 89 dB 1W @ 1M
------SOLD----
Floorstand Speaker
EPOS M16
MADE IN UK
Specifications :
----SOLD---
MADE IN UK
Specifications :
- Bass port? Rear reflex port
- Biwireable? Yes, or triwireable, too
- Connections 4mm banana plug/binding posts
- Crossover frequency (kHz) 150Hz & 3kHz
- Drivers HF: 25mm aluminium dome neodymium tweeter MF: 130mm woofer with die cast aluminium chassis and phase plug LF: 130mm woofer with die cast aluminium chassis 2 1/2 way crossover design
- Extra Solid core DNM internal wiring
- Finish Dark cherry real wood veneer Frequency response (Hz) 48 - 20,000
- Magnetically shielded? Yes
- Nominal impedance (ohms) 4 Power handling (watts) 150
- Recommended amp power (watts) 50 - 200
- Sensitivity (dB) 88
- Supplied accessories Removable front grilles & custom wooden plinths
- W x H x D (mm) 174 x 870 x 210 (including plinths)
- Weight (kg) 10 (each)
----SOLD---
Floorstand Speaker
UNITY
PYRAMID SIGNATURE
MADE IN USA
Specifications :
The Fountainhead Pyramid Signature, a three-driver dynamic loudspeaker, employs 10 ½” cast magnesium frame woofer, 7” cast magnesium frame mid-range, and a 29 mm dome tweeter with an efficiency of 90db and a smooth impedance of 8 ohms, 6 minimum. Capable of handling power as small as a 30 watt tube amplifier or as large as a 300 watt solid state, a performance 30-25 khz (+ or -2db) will be realized. Each pyramid base measures 11” x 11” , with a top measurement of 8” x 8”, is 45” in height and weight 80 pounds. Crossover Unity Linear Phase Angle at 135 hz and 2.0 khz
-----SOLD----
PYRAMID SIGNATURE
MADE IN USA
Specifications :
The Fountainhead Pyramid Signature, a three-driver dynamic loudspeaker, employs 10 ½” cast magnesium frame woofer, 7” cast magnesium frame mid-range, and a 29 mm dome tweeter with an efficiency of 90db and a smooth impedance of 8 ohms, 6 minimum. Capable of handling power as small as a 30 watt tube amplifier or as large as a 300 watt solid state, a performance 30-25 khz (+ or -2db) will be realized. Each pyramid base measures 11” x 11” , with a top measurement of 8” x 8”, is 45” in height and weight 80 pounds. Crossover Unity Linear Phase Angle at 135 hz and 2.0 khz
-----SOLD----
Bookshelf Speaker
VENTURE LE MYSTERE
MADE IN BELGIUM
Specifications :
Frequency Response: 60 - 35.000 Hz
Sensitivity: 86 dB
Impedance: 4 Ohm nominal
Recommended Power: 20 - 100 watt
----SOLD---
MADE IN BELGIUM
Specifications :
Frequency Response: 60 - 35.000 Hz
Sensitivity: 86 dB
Impedance: 4 Ohm nominal
Recommended Power: 20 - 100 watt
----SOLD---
Floorstand Speaker
PMC FB1
MADE IN UK
Specifications:
----SOLD---
MADE IN UK
Specifications:
- Frequency Response: 28Hz - 25kHz
- Sensitivity: 90dB 1w 1m
- Effective ATL Length: 3m 9.8 ft
- Impedance: 8 ohms
- Drive Units: LF Doped 170mm cast alloy chassis, HF 27mm, SONOFLEX dome, Ferro-fluid cooled
- Cross-over Frequency: 2kHz
- Input Connectors: 2 pairs 4mm sockets (Bi-Wire or Bi-Amp)
- Dimensions: 39.37" H X 7.87" W X 11.81" D + plinth
- Weight: 39.6 lbs
----SOLD---
Floorstand Speaker
EPIPHANY MODEL 6-6
MADE IN USA
Specifications :
Frequency Response 45hz-20k
Impedance 8 ohms
Sensitivity (1w,1m) 93 db
Weight 118 lbs
HWD 56,5” x 16,5” x 11,25”
Base Dimensions 17,5” x 18,5”
Minimum Watttage 20 Watts
Like the larger Epiphany 12-12, the entry-level 6-6 is an extraordinarily transparent, neutral, and coherent speaker, capable of recreating eerie-real acoustic spaces in your room with remarkable spatial definition and three-dimensionality. A line source cone-ribbon hybrid, the speaker’s chief trade-offs are a tight sweet spot that effectively renders it a single-listener design, and a lack of bass below roughly 40Hz (depending on your room’s size). A 95dB sensitivity allows for a wide range of amplifiers and setup is not difficult, though the careful among you will be rewarded. Retail price : $8900
(Reviewed by Wayne Garcia , The Abosolute Sounds Editors’ Choice)
----SOLD---
MADE IN USA
Specifications :
Frequency Response 45hz-20k
Impedance 8 ohms
Sensitivity (1w,1m) 93 db
Weight 118 lbs
HWD 56,5” x 16,5” x 11,25”
Base Dimensions 17,5” x 18,5”
Minimum Watttage 20 Watts
Like the larger Epiphany 12-12, the entry-level 6-6 is an extraordinarily transparent, neutral, and coherent speaker, capable of recreating eerie-real acoustic spaces in your room with remarkable spatial definition and three-dimensionality. A line source cone-ribbon hybrid, the speaker’s chief trade-offs are a tight sweet spot that effectively renders it a single-listener design, and a lack of bass below roughly 40Hz (depending on your room’s size). A 95dB sensitivity allows for a wide range of amplifiers and setup is not difficult, though the careful among you will be rewarded. Retail price : $8900
(Reviewed by Wayne Garcia , The Abosolute Sounds Editors’ Choice)
----SOLD---
Standmount Speaker
SPENDOR S100
MADE IN UK
Description:
Three-way, reflex-loaded, stand-mounted loudspeaker (stands should be 12-18" high—suitable 13" stands are available from Chicago Speaker Stands for $175/pair). Drive-units: 0.75" (19mm) soft-dome tweeter, 6" (125mm) polypropylene homopolymer-cone midrange unit, 13" (330mm) doped Bextrene-cone woofer. Crossover frequencies: 600Hz, 4kHz. Frequency response: 38Hz-20kHz ±3dB. Sensitivity: 89.5dB/W/m (2.83V). Nominal impedance: 8 ohms (minimum 5.7 ohms). Amplifier requirements: 15-150W.
Dimensions: 27.5" (698.5mm) H by 14.5" (368.5mm) W by 16.9" (430mm) D. Approximate enclosure volume: 85 liters. Weight: 80 lbs (36.4kg) each.
---SOLD---
MADE IN UK
Description:
Three-way, reflex-loaded, stand-mounted loudspeaker (stands should be 12-18" high—suitable 13" stands are available from Chicago Speaker Stands for $175/pair). Drive-units: 0.75" (19mm) soft-dome tweeter, 6" (125mm) polypropylene homopolymer-cone midrange unit, 13" (330mm) doped Bextrene-cone woofer. Crossover frequencies: 600Hz, 4kHz. Frequency response: 38Hz-20kHz ±3dB. Sensitivity: 89.5dB/W/m (2.83V). Nominal impedance: 8 ohms (minimum 5.7 ohms). Amplifier requirements: 15-150W.
Dimensions: 27.5" (698.5mm) H by 14.5" (368.5mm) W by 16.9" (430mm) D. Approximate enclosure volume: 85 liters. Weight: 80 lbs (36.4kg) each.
---SOLD---
Floorstand Speaker
KEF REFERENCE 104/2
MADE IN UK
Specification:
System Type: Three-way, floor standing
Enclosure type: Coupled cavity
Size: 900 x 280 x 415mm (35.5 x 11 x 16.5 inches)
Weight: 32kg (70.5 lb)
Nominal Impedance: 4 ohms resistive (20Hz-20kHz)
Rated maximum power: 200W programme
Amplifier Requirements: 25-200 watts per channel into 4 ohms
Frequency response (standard): 55-20,000Hz +/-2dB at 2m on design axis
Frequency response (with matching KUBE): 35-20,000Hz +/-2dB at 2m on design axis (-6dB at 20Hz, Q=0.5)
Sensitivity: 92dB at 2m on reference axis for a pink noise input of 2.83V (anechoic conditions)
Maximum output: 112dB on programme peaks under typical listening conditions
Finishes: Selected real wood veneers
Grille: fabric
-----SOLD---
MADE IN UK
Specification:
System Type: Three-way, floor standing
Enclosure type: Coupled cavity
Size: 900 x 280 x 415mm (35.5 x 11 x 16.5 inches)
Weight: 32kg (70.5 lb)
Nominal Impedance: 4 ohms resistive (20Hz-20kHz)
Rated maximum power: 200W programme
Amplifier Requirements: 25-200 watts per channel into 4 ohms
Frequency response (standard): 55-20,000Hz +/-2dB at 2m on design axis
Frequency response (with matching KUBE): 35-20,000Hz +/-2dB at 2m on design axis (-6dB at 20Hz, Q=0.5)
Sensitivity: 92dB at 2m on reference axis for a pink noise input of 2.83V (anechoic conditions)
Maximum output: 112dB on programme peaks under typical listening conditions
Finishes: Selected real wood veneers
Grille: fabric
-----SOLD---
Floorstand Speaker
TRIANGLE HELIADE ES
MADE IN FRANCE
Specifications :
Impedance : 8
Bi-Wiring Compatible
Power admitted (W) : 100
Tweeter : 25mm
Medium : 16cm
Boomer : 16cm
Audio Performances
Bandwith : 50 Hz – 20 kHz
Sensibility (dB/W/m) : 91.0
Dimensions : 970 x 200 × 340
Weight : 18.5 kg
----SOLD---
MADE IN FRANCE
Specifications :
Impedance : 8
Bi-Wiring Compatible
Power admitted (W) : 100
Tweeter : 25mm
Medium : 16cm
Boomer : 16cm
Audio Performances
Bandwith : 50 Hz – 20 kHz
Sensibility (dB/W/m) : 91.0
Dimensions : 970 x 200 × 340
Weight : 18.5 kg
----SOLD---
Bookshelf Speaker
VENTURE DS1
MADE IN BELGIUM
Specifications :
Frequency response: 50 - 40,000 Hz Sensitivity: 86 dB
Impedance: 6 Ohm
Recommended Power: 20 to 100 Watts Break-in time: 24 hours minimum playing time
Drivers: One 1" Graphite ceramic Tweeter
One 5" VT-5 Graphite woofer
Design: 2-way
Weight: 15 kg each
Dimension: H-38 x W-26 x D-29.5 cm
-----SOLD----
MADE IN BELGIUM
Specifications :
Frequency response: 50 - 40,000 Hz Sensitivity: 86 dB
Impedance: 6 Ohm
Recommended Power: 20 to 100 Watts Break-in time: 24 hours minimum playing time
Drivers: One 1" Graphite ceramic Tweeter
One 5" VT-5 Graphite woofer
Design: 2-way
Weight: 15 kg each
Dimension: H-38 x W-26 x D-29.5 cm
-----SOLD----
Floorstand Speaker
DUEVEL BELLA LUNA DIAMANTE
MADE IN GERMANY
Omnidirectional 2-way-fullrangehorn:
Woofer:
Weight: 3,1 kg
Diameter: 22 cm
Ferritmagnet: 140 mm
Tweeter:
Pure Titan cone: 44 mm
Neodym magnets: 12 x 20 mm
Nomex voice coil former
Patented phase plug design
Phaselinear crossover
Impedance: 6 Ohm
Sensitivity: 91 dB SPL
Power handling: 150 W RMS
Beamwidth ±3dB: 40...23kHz
Dimensions:
Width: 280mm
Depth: 280mm
Height: 1050mm
Weight: 30 kg
-----SOLD-----
MADE IN GERMANY
Omnidirectional 2-way-fullrangehorn:
Woofer:
Weight: 3,1 kg
Diameter: 22 cm
Ferritmagnet: 140 mm
Tweeter:
Pure Titan cone: 44 mm
Neodym magnets: 12 x 20 mm
Nomex voice coil former
Patented phase plug design
Phaselinear crossover
Impedance: 6 Ohm
Sensitivity: 91 dB SPL
Power handling: 150 W RMS
Beamwidth ±3dB: 40...23kHz
Dimensions:
Width: 280mm
Depth: 280mm
Height: 1050mm
Weight: 30 kg
-----SOLD-----
Floorstand Speaker
VIENNA ACOUSTICS
GRAND BACH
MADE IN AUSTRIA
Specifications:
Product Height 34-3/5" (without spikes)
· Product Width 7-2/5"
· Product Weight 40 lbs. (each)
· Product Depth 9-4/5"
· Number of Speakers 2
· Speaker Use Floorstanding
· Speaker type 2-way
· Maximum Power Handling 200W
· Frequency Response 35Hz - 20kHz
· Crossover Type 2-way (6dB and 12dB Bessel)
· Tweeter Size 1"
· Tweeter Composition Triple-stacked neodymium silk dome
· Woofer 7" X3P transparent cone midwoofer
· Connector Type 4-way proprietary alloy binding posts
· Enclosure Type Bass reflex
· Magnetically Shielded No
· Sensitivity 90dB
· Impedance 4 ohms
· Required Amplifier Power 30-200W
---SOLD---
GRAND BACH
MADE IN AUSTRIA
Specifications:
Product Height 34-3/5" (without spikes)
· Product Width 7-2/5"
· Product Weight 40 lbs. (each)
· Product Depth 9-4/5"
· Number of Speakers 2
· Speaker Use Floorstanding
· Speaker type 2-way
· Maximum Power Handling 200W
· Frequency Response 35Hz - 20kHz
· Crossover Type 2-way (6dB and 12dB Bessel)
· Tweeter Size 1"
· Tweeter Composition Triple-stacked neodymium silk dome
· Woofer 7" X3P transparent cone midwoofer
· Connector Type 4-way proprietary alloy binding posts
· Enclosure Type Bass reflex
· Magnetically Shielded No
· Sensitivity 90dB
· Impedance 4 ohms
· Required Amplifier Power 30-200W
---SOLD---
Floorstand Speaker
B&W DM-305
MADE IN ENGLAND
-----SOLD---
MADE IN ENGLAND
-----SOLD---
Bookshelf Speaker
B&W DM-600 S3
MADE IN ENGLAND
---SOLD---
MADE IN ENGLAND
---SOLD---
Bookshelf Speaker
B&W DM-602 S3
MADE IN ENGLAND
----SOLD---
MADE IN ENGLAND
----SOLD---
Floorstand Speaker
PSB ALPHA T1
MADE BY CANADA
---SOLD---
MADE BY CANADA
---SOLD---
Bookshelf Speaker
PSB ALPHA B1
MADE BY CANADA
---SOLD---
MADE BY CANADA
---SOLD---
Rear/Surround Speaker
TANNOY MERCURY MXR
MADE BY UK
Compact and easy to fit, with their built in, flush-mount wall brackets, the Mercury mXRs are punchy sounding, yet smart and discrete. Despite the price, high-quality components are used throughout, including the glued and screwed cabinet, soft-domed tweeter and ceramic-coated mid/bass driver.
Power handling: 70 watts
Sensitivity: 86 dB
Impedance: 8 ohms
Magnetically shielded? No
HxWxD (mm) / Weight: 240 x 144 x 136 / 2.5 Kg
Frequency response: 59 - 20000 Hz
Biwireable? No
Bass port? Front ported
Drivers: 25mm soft domed tweeter, 100mm ceramic coated paper cone
Extra: Built in wall bracket at rear of speakers
----SOLD----
MADE BY UK
Compact and easy to fit, with their built in, flush-mount wall brackets, the Mercury mXRs are punchy sounding, yet smart and discrete. Despite the price, high-quality components are used throughout, including the glued and screwed cabinet, soft-domed tweeter and ceramic-coated mid/bass driver.
Power handling: 70 watts
Sensitivity: 86 dB
Impedance: 8 ohms
Magnetically shielded? No
HxWxD (mm) / Weight: 240 x 144 x 136 / 2.5 Kg
Frequency response: 59 - 20000 Hz
Biwireable? No
Bass port? Front ported
Drivers: 25mm soft domed tweeter, 100mm ceramic coated paper cone
Extra: Built in wall bracket at rear of speakers
----SOLD----
Bookshelf Speaker
TANNOY SIXIES 609
MADE IN UK
Tannoy 609's standmounts, with grilles and with custom stands.
89dB, 200 Watt, 46Hz-30kHz
----SOLD---
MADE IN UK
Tannoy 609's standmounts, with grilles and with custom stands.
89dB, 200 Watt, 46Hz-30kHz
----SOLD---
Floorstand Speaker
B&W DM603 S2
MADE IN UK
Description 21/2-way vented-box system
Drive units 1 x 25mm metal dome
high-frequency
1 x 180mm woven Kevlar® cone
bass/midrange
1 x 180mm paper/Kevlar® cone
bass
Freq resp 48Hz – 20kHz ± 3dB on reference
axis
S e n s i t i v i t y 90dB spl (2.83V, 1m)
Nominal impedance 8 Ohm(min 4.3 Ohm)
Power handling 25W - 150W into 8 ohm on
unclipped programme
D i m e n s i o n s Height: 850mm Width: 236mm
Depth: 306mm
F i n i s h e s Cabinet: Black Ash Vinyl,
Grilles: Black cloth
-----SOLD----
MADE IN UK
Description 21/2-way vented-box system
Drive units 1 x 25mm metal dome
high-frequency
1 x 180mm woven Kevlar® cone
bass/midrange
1 x 180mm paper/Kevlar® cone
bass
Freq resp 48Hz – 20kHz ± 3dB on reference
axis
S e n s i t i v i t y 90dB spl (2.83V, 1m)
Nominal impedance 8 Ohm(min 4.3 Ohm)
Power handling 25W - 150W into 8 ohm on
unclipped programme
D i m e n s i o n s Height: 850mm Width: 236mm
Depth: 306mm
F i n i s h e s Cabinet: Black Ash Vinyl,
Grilles: Black cloth
-----SOLD----
Bookshelf Speaker
PROAC RESPONSE ONE 'S'
MADE IN UK
Specifications :
Nominal Impedance: 8 ohms recommended
Recommended Amplifiers: 20 to 100 watts
Frequency Response: 40hz to 25Khz
Sensitivity: 86db linear for 1 watt at 1 metre
Bass/Midrange Driver: New 5” (127mm) unit with special transparent cone and phase plug mounted on
die-cast chassis. High temperature voice coil and vented magnet assembly.
Tweeter: ProAc 3⁄4" (19mm) dome unit, with honeycomb-wound voice coil. Special damping and ferrofluid-cooled coil assembly.
Crossover: Highest quality components as used on other Response models. Adaptable for bi-amping.
Dimensions: 12” (305mm) high (on plinth) 7” (178mm) wide 91⁄4” (248mm) deep
Mode: Stand mounted.
Grille: Acoustically transparent crimplene.
------SOLD----
MADE IN UK
Specifications :
Nominal Impedance: 8 ohms recommended
Recommended Amplifiers: 20 to 100 watts
Frequency Response: 40hz to 25Khz
Sensitivity: 86db linear for 1 watt at 1 metre
Bass/Midrange Driver: New 5” (127mm) unit with special transparent cone and phase plug mounted on
die-cast chassis. High temperature voice coil and vented magnet assembly.
Tweeter: ProAc 3⁄4" (19mm) dome unit, with honeycomb-wound voice coil. Special damping and ferrofluid-cooled coil assembly.
Crossover: Highest quality components as used on other Response models. Adaptable for bi-amping.
Dimensions: 12” (305mm) high (on plinth) 7” (178mm) wide 91⁄4” (248mm) deep
Mode: Stand mounted.
Grille: Acoustically transparent crimplene.
------SOLD----
Super Tweeter
TANNOY ST200
MADE IN UK
PERFORMANCE
Recommended amplifier power Up to 250 Watts Continuous power handling 135 Watts RMS (DIN IEC 268)
Sensitivity 95dB (2.83Volts @ 1 metre)
Nominal impedance 8 Ohms
Frequency response To 54Hz, usable output (- 18dB) to 100kHz
DRIVE UNITS
Driver type 25mm (1.00") diameter 25 micron titanium dome, gold finish, with neodymium magnet system
CROSSOVER
Frequency 14kHz, 16kHz or 18kHz adjustable
Type 3rd order compensated high pass
Level 89dB, 90.5dB, 92dB, 93.5dB or 95dB adjustable
CONSTRUCTION
Dimensions 150mm (6.00in)
---SOLD---
MADE IN UK
PERFORMANCE
Recommended amplifier power Up to 250 Watts Continuous power handling 135 Watts RMS (DIN IEC 268)
Sensitivity 95dB (2.83Volts @ 1 metre)
Nominal impedance 8 Ohms
Frequency response To 54Hz, usable output (- 18dB) to 100kHz
DRIVE UNITS
Driver type 25mm (1.00") diameter 25 micron titanium dome, gold finish, with neodymium magnet system
CROSSOVER
Frequency 14kHz, 16kHz or 18kHz adjustable
Type 3rd order compensated high pass
Level 89dB, 90.5dB, 92dB, 93.5dB or 95dB adjustable
CONSTRUCTION
Dimensions 150mm (6.00in)
---SOLD---
Bookshelf Speaker
TOTEM MODEL ONE
SIGNATURE
MADE IN CANADA
Specifications :
Break in time 150 - 200 hours
Placement from rear wall 1' - 4' / 305 - 1,219 mm
Placement distance apart 3' - 7' / 914 - 2,134 mm no toe-in, 12' / 3,658 mm with toe-in
Frequency Response <50 Hz - 20 kHz ± 3 dB
Impedance 8 ohms
Sensitivity 87 dB/W at 8 ohms
Recommended Power 15 - 120 W
Crossover frequency 2.7 kHz electrical and mechanical
Woofer 5.5" / 140 mm, 3" / 76 mm voice coil
Tweeter 1" / 25 mm aluminum dome, chambered
Dimensions (w x h x d) 6.5 x 12.2 x 8.9" /
165 x 310 x 225 mm
Internal volume 7.2 l (internal)
Weight 4.1 kg (approx. 9 lb)
-----SOLD----
SIGNATURE
MADE IN CANADA
Specifications :
Break in time 150 - 200 hours
Placement from rear wall 1' - 4' / 305 - 1,219 mm
Placement distance apart 3' - 7' / 914 - 2,134 mm no toe-in, 12' / 3,658 mm with toe-in
Frequency Response <50 Hz - 20 kHz ± 3 dB
Impedance 8 ohms
Sensitivity 87 dB/W at 8 ohms
Recommended Power 15 - 120 W
Crossover frequency 2.7 kHz electrical and mechanical
Woofer 5.5" / 140 mm, 3" / 76 mm voice coil
Tweeter 1" / 25 mm aluminum dome, chambered
Dimensions (w x h x d) 6.5 x 12.2 x 8.9" /
165 x 310 x 225 mm
Internal volume 7.2 l (internal)
Weight 4.1 kg (approx. 9 lb)
-----SOLD----
Bookshelf Speaker
USHER BE-718
MADE IN TAIWAN
Specifications :
MADE IN TAIWAN
Specifications :
- Design: Two-Way, Slot-Loaded
- Drivers: One 1.25" Beryllium Dome Tweeter, One 7" Woofer
- MFR: 42 Hz - 35 kHz, - 3 dB
- Sensitivity: 87 dB/W/M
- Nominal Impedance: 8 Ohms
- Crossover Frequency: 2.06 kHz
- Power Handling: 200 Watts
- Dimensions: 15.2" H x 10.2" W x 16.9" D
- Weight: 37.9 Pounds/Each
Bookshelf Speaker
DALI IKON 2
MADE IN DENMARK
Specifications :
Sensitivity (db/w/m) 92
Dimensions (hwd, cm) 44x19x30
Impedance (ohms) 6
Max power handling (watts) 130
Standmount Yes
Biwirable Yes
---SOLD---
MADE IN DENMARK
Specifications :
Sensitivity (db/w/m) 92
Dimensions (hwd, cm) 44x19x30
Impedance (ohms) 6
Max power handling (watts) 130
Standmount Yes
Biwirable Yes
---SOLD---
Floorstand Speaker
Q ACOUSTICS 1030i
Recommended amp power (watts): 25 - 100
Sensitivity (dB): 90
Nominal impedance (ohms): 6
Magnetically shielded? Yes
W x H x D (mm): 195 x 900 x 295
Weight (kg): 15.5 each
Frequency response (Hz): 48 - 20,000
Crossover frequency (kHz): 2.7 (upgraded crossover design)
Biwireable? Yes
Connections: 4mm banana plug/binding posts
Bass port? Front firing
Drivers: HF: 25mm ferro-fluid cooled, micro polyester weave tweeter
LF: 165mm bespoke fibre cone
Supplied accessories: Black floor plinths with adjustable carpet spikes, removable front grilles
Finish: Beech
Extra: Sand-fillable cabinet base, for improved stability & acoustic damping. Features upgraded
components and improved tweeter performance over original 1030 model.
---SOLD---
Recommended amp power (watts): 25 - 100
Sensitivity (dB): 90
Nominal impedance (ohms): 6
Magnetically shielded? Yes
W x H x D (mm): 195 x 900 x 295
Weight (kg): 15.5 each
Frequency response (Hz): 48 - 20,000
Crossover frequency (kHz): 2.7 (upgraded crossover design)
Biwireable? Yes
Connections: 4mm banana plug/binding posts
Bass port? Front firing
Drivers: HF: 25mm ferro-fluid cooled, micro polyester weave tweeter
LF: 165mm bespoke fibre cone
Supplied accessories: Black floor plinths with adjustable carpet spikes, removable front grilles
Finish: Beech
Extra: Sand-fillable cabinet base, for improved stability & acoustic damping. Features upgraded
components and improved tweeter performance over original 1030 model.
---SOLD---
Bookshelf Speaker
DYNAUDIO FOCUS 140
MADE IN DENMARK
Description:
Two-way, reflex-loaded, stand-mounted loudspeaker. Drive-units: 1.1" soft-dome tweeter, 5.5" plastic-cone woofer. Crossover frequency: 2.4kHz, first-order slopes. Frequency range: 41Hz–25kHz. Nominal impedance: 4 ohms. Sensitivity: 86dB/2.83V/m. Dimensions: 13.65" (350mm) H by 7.9" (203mm) W by 11.5" (295mm) D. Weight: 18.7 lbs (8.5 kg).
----SOLD---
MADE IN DENMARK
Description:
Two-way, reflex-loaded, stand-mounted loudspeaker. Drive-units: 1.1" soft-dome tweeter, 5.5" plastic-cone woofer. Crossover frequency: 2.4kHz, first-order slopes. Frequency range: 41Hz–25kHz. Nominal impedance: 4 ohms. Sensitivity: 86dB/2.83V/m. Dimensions: 13.65" (350mm) H by 7.9" (203mm) W by 11.5" (295mm) D. Weight: 18.7 lbs (8.5 kg).
----SOLD---
Bookshelf Speaker
USHER S520
MADE IN TAIWAN
Description:
MADE IN TAIWAN
Description:
- Sensitivity:86dB 1watt/1m
- Nominal impedance:8ohms
- Frequency response(-3dB):55Hz~20kHz
- Power handling:50watts
- Crossover frequencies:2.0kHz
- Dimensions(wxdxh):18cmx25cmx30cm
Floorstand Speaker
TOTEM STAFF
MADE IN CANADA
Specifications :
Placement from rear wall: 1' - 4' / 304 - 1,219 mm
Placement distance apart: 4' - 10' / 1 219 - 3,048 mm
Mass Loading: 2,3 - 4,5 kg / 5 - 10 lb in each cabinet
Frequency Response: <39 Hz - 22 kHz ± 3 dB
Impedance: 8 ohms
Sensitivity: 88 dB
Recommended Power: 20 - 100 W
Crossover frequency: 2.5 kHz, 2nd order
Woofer: 5.5" / 140 mm long throw
Tweeter: 1" / 25 mm textile dome
Max SPL's: In average size listening room
(12' x 20' / 4 m x 6 m)
103 dB peak
(12' x 15' / 3,658 x 4,572 mm)
from pair at 7' / 2 m
Dimensions (w x h x d): 6.3 x 33.5 x 9.5"
160 x 850 x 242 mm
----SOLD---
MADE IN CANADA
Specifications :
Placement from rear wall: 1' - 4' / 304 - 1,219 mm
Placement distance apart: 4' - 10' / 1 219 - 3,048 mm
Mass Loading: 2,3 - 4,5 kg / 5 - 10 lb in each cabinet
Frequency Response: <39 Hz - 22 kHz ± 3 dB
Impedance: 8 ohms
Sensitivity: 88 dB
Recommended Power: 20 - 100 W
Crossover frequency: 2.5 kHz, 2nd order
Woofer: 5.5" / 140 mm long throw
Tweeter: 1" / 25 mm textile dome
Max SPL's: In average size listening room
(12' x 20' / 4 m x 6 m)
103 dB peak
(12' x 15' / 3,658 x 4,572 mm)
from pair at 7' / 2 m
Dimensions (w x h x d): 6.3 x 33.5 x 9.5"
160 x 850 x 242 mm
----SOLD---
Floorstand Speaker
DYNAUDIO FOCUS 220
MADE IN DENMARK
Description:
For a dynamic power delivery in the bass region, this slim floor-standing loudspeaker relies on two mid/bass drivers from the completely newly developed Esotec+ generation.
By employing a double-magnet motor system with ultra-compressed Ferrite magnets, dramatic musical passages are reproduced without compromise. And with increased cone excursion, even the most powerful transients are delivered without compression.
Specifications:
Focus 220- Rosewood
Sensitivity (2.83 V/1 m): 87 dB
IEC Long Term Power Handling: > 250 Watts
Impedance (nominal): 4 Ohms
Frequency Response (±3 dB): 32 Hz-25 kHz
Dimensions (W x H x L): 8.07 x 38.58 x 11.62", 205 x 980 x 295 mm
Weight: 18.7 kg
----SOLD----
MADE IN DENMARK
Description:
For a dynamic power delivery in the bass region, this slim floor-standing loudspeaker relies on two mid/bass drivers from the completely newly developed Esotec+ generation.
By employing a double-magnet motor system with ultra-compressed Ferrite magnets, dramatic musical passages are reproduced without compromise. And with increased cone excursion, even the most powerful transients are delivered without compression.
Specifications:
Focus 220- Rosewood
Sensitivity (2.83 V/1 m): 87 dB
IEC Long Term Power Handling: > 250 Watts
Impedance (nominal): 4 Ohms
Frequency Response (±3 dB): 32 Hz-25 kHz
Dimensions (W x H x L): 8.07 x 38.58 x 11.62", 205 x 980 x 295 mm
Weight: 18.7 kg
----SOLD----
Center Speaker
DUNLAVY SC-1
MADE IN USA
Dunlavy SC-1
One 1" Cloth Dome Tweeter, Two 4 1/2" Mid/Bass Drivers
MFR: 70 Hz - 20 kHz ± 1.5 dB
Impedance: Nominal 7 Ohms
Sensitivity: 91 dB - 2.83 Volts Applied
Size: 20" H x 8" W x 10 1/2" D
Weight: 25 Pounds
----SOLD----
MADE IN USA
Dunlavy SC-1
One 1" Cloth Dome Tweeter, Two 4 1/2" Mid/Bass Drivers
MFR: 70 Hz - 20 kHz ± 1.5 dB
Impedance: Nominal 7 Ohms
Sensitivity: 91 dB - 2.83 Volts Applied
Size: 20" H x 8" W x 10 1/2" D
Weight: 25 Pounds
----SOLD----
Floorstand Speaker
DALI IKON 8
MADE IN DENMARK
The IKON 8 is the top model of the IKON Series. Like all of the IKON´s, IKON 8 features low loss paper/woodfibre drivers and a hybrid tweeter module. This ensures that the listener will experience the subtlest musical details, even at low listening levels.
Essentially, IKON 8 is a three-way bass reflex speaker with 2 x 8" bass drivers, a 6.5” midrange driver and DALI´s proprietary ribbon/soft dome hybrid tweeter module. In fact it is more a three-and-a half-way design, as the dome and the ribbon do not cover the same frequency range.
Specifications:
---SOLD---
MADE IN DENMARK
The IKON 8 is the top model of the IKON Series. Like all of the IKON´s, IKON 8 features low loss paper/woodfibre drivers and a hybrid tweeter module. This ensures that the listener will experience the subtlest musical details, even at low listening levels.
Essentially, IKON 8 is a three-way bass reflex speaker with 2 x 8" bass drivers, a 6.5” midrange driver and DALI´s proprietary ribbon/soft dome hybrid tweeter module. In fact it is more a three-and-a half-way design, as the dome and the ribbon do not cover the same frequency range.
Specifications:
- Frequency range +/- 3 dB [Hz]: 35 – 30,000
- Sensitivity (2.83V/1m) [dB]: 91
- Nominal impedance [ohms]: 6
- Maximum SPL [dB]: 113
- Recommended amp. power [Watts]: 40 -250
- Crossover frequencies [Hz]: 700/3,000/14,000
- Hybrid tweeter module: 1 x 28 mm soft dome 1 x 17 x 45 mm ribbon
- Midrange driver: 1 x 6½”
- Low frequency driver(s): 2 x 8"
- Enclosure type: Bass reflex
- Bass reflex tuning frequency [Hz]: 28.0
- Connection input(s): Bi-wire
- Recommended placement: Floor
- Dimensions (H x W x D) [mm]: 1160 x 245 x 393
- Weight [kg/lb]: 33.3/73.4
---SOLD---
Floorstand Speaker
B&W DM-603 S3
MADE IN ENGLAND
· Number of Speakers : 3
· Impedance : 8 Ohm
· Spikes
· Bi-Wiring Compatible
· Power admitted (W) : 150
· Tweeter : 25 mm
· Medium : 165 mm
· Boomer : 165 mm
· Bandwith : 44Hz – 22 kHz
· Sensibility (dB/W/m) : 90.0
· Dimensions : 910 x 204 × 287 mm
· Weight : 19.5 kg
---SOLD---
MADE IN ENGLAND
· Number of Speakers : 3
· Impedance : 8 Ohm
· Spikes
· Bi-Wiring Compatible
· Power admitted (W) : 150
· Tweeter : 25 mm
· Medium : 165 mm
· Boomer : 165 mm
· Bandwith : 44Hz – 22 kHz
· Sensibility (dB/W/m) : 90.0
· Dimensions : 910 x 204 × 287 mm
· Weight : 19.5 kg
---SOLD---
Floorstand Speaker
AUDIO NOTE
AZ TWO
MADE IN DENMARK
Description :
2-way folded parabolic rear loaded quarter wave quasi horn, ¾” tweeter, 8” bass driver, 93dB efficient
---SOLD---
AZ TWO
MADE IN DENMARK
Description :
2-way folded parabolic rear loaded quarter wave quasi horn, ¾” tweeter, 8” bass driver, 93dB efficient
---SOLD---
Floorstand Speaker
EPOS M22
The flagship of the Epos range, the M22 is tri-wirable, thanks to three pairs of metal five-way binding posts. Providing separate feeds to each of the drive units through premium quality connectors offers worthwhile gains in stereo imagery, control and detail resolution.three driver complement is as follows:Tweeter: 25mm aluminium dome tweeter with optimised neodymium magnet system and ferrofluid coolingMid Range: Magnetically shielded 150mm polymer cone with 32mm voice coil complete with injection moulded phase plug, utilising the Epos die cast aluminium chassisBass Driver: Magnetically shielded 150mm polymer cone with 32mm voice coil complete with weighted injection moulded dust cap, utilising the Epos die cast aluminium chassisThe cabinet itself is a low diffraction design, eliminating secondary sources of sound, improving stereo imaging and detail resolution. Extensive internal bracing reduces cabinet coloration. The cabinet is in two sections internally—the top section houses the tweeter and mid.
---SOLD---
The flagship of the Epos range, the M22 is tri-wirable, thanks to three pairs of metal five-way binding posts. Providing separate feeds to each of the drive units through premium quality connectors offers worthwhile gains in stereo imagery, control and detail resolution.three driver complement is as follows:Tweeter: 25mm aluminium dome tweeter with optimised neodymium magnet system and ferrofluid coolingMid Range: Magnetically shielded 150mm polymer cone with 32mm voice coil complete with injection moulded phase plug, utilising the Epos die cast aluminium chassisBass Driver: Magnetically shielded 150mm polymer cone with 32mm voice coil complete with weighted injection moulded dust cap, utilising the Epos die cast aluminium chassisThe cabinet itself is a low diffraction design, eliminating secondary sources of sound, improving stereo imaging and detail resolution. Extensive internal bracing reduces cabinet coloration. The cabinet is in two sections internally—the top section houses the tweeter and mid.
---SOLD---
Floorstand Speaker
TOTEM ARRO
MADE IN CANADA
Placement from rear wall: 6" - 3' / 152 - 914 mm
Placement distance apart: 2' - 12' / 610 - 3,658 mm
Mass Loading: 10 - 20 lb / 4.5 - 9 kg in each cabinet
Frequency Response: 40 Hz - 20 kHz ± 3 dB
(with proper room positioning)
Impedance: 4 ohms
Sensitivity: 87 dB
Recommended Power: 20 - 80 W
Dimensions (w x h x d): 5.1 x 33.5 x 7.1"
130 x 850 x 180 mm
----SOLD---
MADE IN CANADA
Placement from rear wall: 6" - 3' / 152 - 914 mm
Placement distance apart: 2' - 12' / 610 - 3,658 mm
Mass Loading: 10 - 20 lb / 4.5 - 9 kg in each cabinet
Frequency Response: 40 Hz - 20 kHz ± 3 dB
(with proper room positioning)
Impedance: 4 ohms
Sensitivity: 87 dB
Recommended Power: 20 - 80 W
Dimensions (w x h x d): 5.1 x 33.5 x 7.1"
130 x 850 x 180 mm
----SOLD---
Floorstand Speaker
B&W 683
The B&W 683 is the largest set of main speakers in Bowers & Wilkins (B&W) affordable high-end 600 series of home audio speakers. These large floorstanding speakers are ideal for a hi-fi or home cinema system in a large room.
A pair of 6.5" aluminum/paper/Kevlar cones with rigid mushroom design and front firing flowport provide a deep and dynamic bottom end with plenty of power. The 6" woven Kevlar cone is dedicated to midrange and the incorporated fixed centre bullet helps smooth the response into upper frequencies. This Kevlar midrange is the only cone in the entire 600 series to incorporate FST technology, which essentially uses a foam ring allowing the cone to float freely for an improved cone response. There is a 1" aluminum dome tweeter located in the top of the cabinet, which handles the high frequencies. The tweeter is contained in a Nautilus tapering tube, which is designed to only project sound through a hollow pole magnet frontwards, and is tapered towards the rear to eliminate reflections off the rear of the cabinet producing unwanted sound effects
SPECIFICATIONS :
Crossover Tuning
Mushrooms
Nautilus tube loaded aluminium dome tweeter
Flowport
3-way vented-box system
1x ø25mm (1 in) aluminium dome high-frequency
1x ø150mm (6 in) woven Kevlar cone FST midrange
2x ø165mm (6.5 in) Aluminium/paper/Kevlar cone bass
Frequency range: -6dB at 30Hz and 50kHz
Frequency response: 38Hz - 22kHz ±3dB on reference axis
Horizontal Dispersion Within 2dB of reference response: over 60º arc
Vertical Dispersion Within 2dB of reference response: over 10º arc
Sensitivity: 90dB spl (2.83V, 1m)
Harmonic distortion: 2nd and 3rd harmonics (90dB, 1m) ( <1% 90Hz - 22kHz , <0.5% 120Hz - 20kHz)
Nominal impedance: 8 Ohms (minimum 3.0 Ohms)
Crossover frequencies: 350Hz, 4kHz
Crossover Filters: 1st Order – tweeter , 2nd Order – midrange low pass , 2nd Order – midrange high pass , 3rd Order – bass
Recommended amplifier power: 25W - 200W into 8 Ohms on unclipped programme
Max. recommended cable impedance: 0.1 Ohms
Height: 985mm (38.8 in) (not including plinth or feet)
Width: 198mm (7.8 in)
Depth: 340mm (13.4 in)
Net weight: 26kg (57.3 lb)
Finishes (vinyl) : Light Oak
Removable black cloth grill
----SOLD---
The B&W 683 is the largest set of main speakers in Bowers & Wilkins (B&W) affordable high-end 600 series of home audio speakers. These large floorstanding speakers are ideal for a hi-fi or home cinema system in a large room.
A pair of 6.5" aluminum/paper/Kevlar cones with rigid mushroom design and front firing flowport provide a deep and dynamic bottom end with plenty of power. The 6" woven Kevlar cone is dedicated to midrange and the incorporated fixed centre bullet helps smooth the response into upper frequencies. This Kevlar midrange is the only cone in the entire 600 series to incorporate FST technology, which essentially uses a foam ring allowing the cone to float freely for an improved cone response. There is a 1" aluminum dome tweeter located in the top of the cabinet, which handles the high frequencies. The tweeter is contained in a Nautilus tapering tube, which is designed to only project sound through a hollow pole magnet frontwards, and is tapered towards the rear to eliminate reflections off the rear of the cabinet producing unwanted sound effects
SPECIFICATIONS :
Crossover Tuning
Mushrooms
Nautilus tube loaded aluminium dome tweeter
Flowport
3-way vented-box system
1x ø25mm (1 in) aluminium dome high-frequency
1x ø150mm (6 in) woven Kevlar cone FST midrange
2x ø165mm (6.5 in) Aluminium/paper/Kevlar cone bass
Frequency range: -6dB at 30Hz and 50kHz
Frequency response: 38Hz - 22kHz ±3dB on reference axis
Horizontal Dispersion Within 2dB of reference response: over 60º arc
Vertical Dispersion Within 2dB of reference response: over 10º arc
Sensitivity: 90dB spl (2.83V, 1m)
Harmonic distortion: 2nd and 3rd harmonics (90dB, 1m) ( <1% 90Hz - 22kHz , <0.5% 120Hz - 20kHz)
Nominal impedance: 8 Ohms (minimum 3.0 Ohms)
Crossover frequencies: 350Hz, 4kHz
Crossover Filters: 1st Order – tweeter , 2nd Order – midrange low pass , 2nd Order – midrange high pass , 3rd Order – bass
Recommended amplifier power: 25W - 200W into 8 Ohms on unclipped programme
Max. recommended cable impedance: 0.1 Ohms
Height: 985mm (38.8 in) (not including plinth or feet)
Width: 198mm (7.8 in)
Depth: 340mm (13.4 in)
Net weight: 26kg (57.3 lb)
Finishes (vinyl) : Light Oak
Removable black cloth grill
----SOLD---
Floorstand Speaker
KEF REFERENCE 205
MADE IN UK
Design : 4 way reflex
Drive units : LF: 2 x 200 mm (8”)
MF: 1 x 165 mm (6 1/2”)
HF: 1 x 25 mm (1”)
SHF: 1 x 19 mm (3/4”)
Frequency response at 15°
horizontally off axis ±3 dB : 45 Hz - 55 kHz
LF Corner -6 dB : 35 Hz
Crossover frequencies : 400Hz, 2.7 kHz, 15 kHz
Amplifier requirements : 50 - 300 W
Sensitivity (2.83V/1m) : 90 dB
Maximum output : 115 dB
Impedance : 8 Ohms (3.2 Ohms min
Magnetic shielding : Yes
Weight : 33 kg (72.6 lbs)
Dimensions : (H x W x D) 1155 x 285 x 433 mm
---SOLD----
MADE IN UK
Design : 4 way reflex
Drive units : LF: 2 x 200 mm (8”)
MF: 1 x 165 mm (6 1/2”)
HF: 1 x 25 mm (1”)
SHF: 1 x 19 mm (3/4”)
Frequency response at 15°
horizontally off axis ±3 dB : 45 Hz - 55 kHz
LF Corner -6 dB : 35 Hz
Crossover frequencies : 400Hz, 2.7 kHz, 15 kHz
Amplifier requirements : 50 - 300 W
Sensitivity (2.83V/1m) : 90 dB
Maximum output : 115 dB
Impedance : 8 Ohms (3.2 Ohms min
Magnetic shielding : Yes
Weight : 33 kg (72.6 lbs)
Dimensions : (H x W x D) 1155 x 285 x 433 mm
---SOLD----
Bookshelf Speaker
AUDIO NOTE AX ONE
MADE IN UK
The AX One range as designed as a general purpose small loudspeakers, and will work well with almost any amplifier.
2-way folded parabolic rear loaded quarter wave quasi horn, ¾” tweeter, 5” bass driver, 88dB efficient
---SOLD---
MADE IN UK
The AX One range as designed as a general purpose small loudspeakers, and will work well with almost any amplifier.
2-way folded parabolic rear loaded quarter wave quasi horn, ¾” tweeter, 5” bass driver, 88dB efficient
---SOLD---
Bookshelf Speaker
HARBETH P3ESR
MADE IN ENGLAND
SPECIFICATIONS :
Transducer system 2-way: Harbeth 110mm RADIAL2™ mid/bass; 19mm Ferro-cooled tweeter with HexGrille.
Freq. response 75Hz - 20kHz +/-3dB free space, 1m with grille on with smooth off-axis response.
Impedance 6 ohms - easy to drive. Sensitivity 83.5db/1W/1m
Amp. suggestion Works with a wide range of amplifiers, ideally from 15W/channel.
Power handling 50W programme
Connector Two 4mm gold-plated binding posts for wires or plugs
Dimensions (hxwxd) 306 x 189 x 202 mm (inl. grille and terminals)
Finish Cherry
Space needs Ideally > 0.30m from rear wall
Stands Typically 24+ inches
Weight 6.3kg each (without packing)
Packing One matched pair per protective carton
----SOLD---
MADE IN ENGLAND
SPECIFICATIONS :
Transducer system 2-way: Harbeth 110mm RADIAL2™ mid/bass; 19mm Ferro-cooled tweeter with HexGrille.
Freq. response 75Hz - 20kHz +/-3dB free space, 1m with grille on with smooth off-axis response.
Impedance 6 ohms - easy to drive. Sensitivity 83.5db/1W/1m
Amp. suggestion Works with a wide range of amplifiers, ideally from 15W/channel.
Power handling 50W programme
Connector Two 4mm gold-plated binding posts for wires or plugs
Dimensions (hxwxd) 306 x 189 x 202 mm (inl. grille and terminals)
Finish Cherry
Space needs Ideally > 0.30m from rear wall
Stands Typically 24+ inches
Weight 6.3kg each (without packing)
Packing One matched pair per protective carton
----SOLD---
